{"title":"GPIO","description":"\u003cp\u003eBrowse our GPIO collection. Hot Sale.\u003c\/p\u003e","products":[{"product_id":"adafruit-perma-proto-hat-for-pi-mini-kit-with-eeprom","title":"Adafruit Perma-Proto HAT for Pi Mini Kit - With EEPROM","description":"\u003cp\u003eDesign your own Pi HAT, attach custom circuitry and otherwise dress your Raspberry Pi with this jaunty prototyping HAT kit \u003cstrong\u003ewith EEPROM\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eTo kick off the Adafruit HAT party, we have this Perma-Proto-inspired plug-in daughter board. It has a grid of 0.1\" prototyping soldering holes for attaching chips, resistors, LED, potentiometers and more. The holes are connected underneath with traces to mimic the solderless breadboards with which you're familiar. There are also long power strips for +3V, +5V and Ground connections to the Pi. Near the top, we break out nearly every pin you could want to connect to the Pi (#26 didn't quite make the cut).\u003c\/p\u003e\n\u003cp\u003eThis is the fancier version of our Perma-Proto HAT. It comes with a printed circuit board and a single 2x20 GPIO Header for Raspberry Pi to put your Perma-Proto on top of your Raspberry Pi (like a nice little hat...) This version comes with a blank 24C32 I2C EEPROM soldered on and connected to the EEDAT\/EECLK lines so \u003cem\u003eyou cannot 'stack' it with other HATs\u003c\/em\u003e. However, you \u003cem\u003ecan\u003c\/em\u003e program in the EEPROM to make a self-identifying setup using the Pi Foundations' HAT specs - please note the specifications are still under development.\u003c\/p\u003e\n\u003cp\u003eYou can customize your Perma-Proto setup using a standard 2x20 stacking header or an extra tall 2x20 stacking header. You can also swap out the 2x20 header with a slim 2x20 type if you want it to sit closer to the Pi, or an extra tall one if you want it to sit above the USB\/Ethernet ports.\u003c\/p\u003e\n\u003cp\u003eA bit of light soldering is required to attach the header to the PCB but it's easy work.\u003c\/p\u003e\n\u003cp\u003eFor the same Proto HAT with no EEPROM click here\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eThis hat is only compatible with the Raspberry Pi Zero, A+, B+, 2, 3, 4, 5 etc (any Pi with a 2 x 20 connector)! \u003c\/strong\u003eIt will \u003cstrong\u003enot\u003c\/strong\u003e work with the Raspberry Pi Model A or B with 2 x 13 connectors\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote\u003c\/strong\u003e: Raspberry Pi is \u003cstrong\u003eNOT \u003c\/strong\u003eincluded\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cdiv id=\"tab-technical-details-content\" class=\"panel-collapse collapse in\"\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"col-lg-12 col-md-12 col-sm-12 col-xs-12\"\u003e\n\u003cul\u003e\n\u003cli\u003e​Header Dimensions: 5mm x 51mm x 12mm\u003c\/li\u003e\n\u003cli\u003ePCB Dimensions: 66mm x 57mm x 2mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eResources\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eEagleCAD PCB Files\u003c\/li\u003e\n\u003cli\u003eAdafruit Fritzing Library\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cul id=\"product-files\"\u003e\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Adafruit","offers":[{"title":"Default Title","offer_id":53774818181485,"sku":"tgt1787256985045","price":5.84,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0920\/0526\/9869\/files\/adafruit-perma-proto-hat-for-pi-mini-kit---with-eeprom_1.jpg?v=1787256990"},{"product_id":"adafruit-pitft-22-hat-mini-kit-320-x-240-22-tft-no-touch","title":"Adafruit PiTFT 2.2\" HAT Mini Kit - 320 x 240 2.2\" TFT - No Touch","description":"\u003cp\u003eThe cute PiTFT got even more adorable with this little primary display for Raspberry Pi in HAT form! It features a 2.2\" display with 320 x 240 16-bit colour pixels. The HAT uses the high-speed SPI interface on the Pi and can use the mini display as a console, X window port, displaying images or video etc. Best of all, it plugs right in on top of your Model A+ or B+ and fits into our case quite nicely.\u003c\/p\u003e\n\u003cp\u003eIt's designed to plug directly into the Raspberry Pi 2, Pi 3, Pi 4, Pi 5, Pi Zero, or Raspberry Pi 1 Model A+ or B+. While not specifically designed for Pi Model A or B, you can use it with A\/B if you solder in an extra-tall 2x13 header (\u003cstrong\u003enot included\u003c\/strong\u003e) instead of the included 2 x 20 header\u003c\/p\u003e\n\u003cp\u003eThis design uses the hardware SPI pins (SCK, MOSI, MISO, CE0, CE1) as well as GPIO #25. All other GPIO are unused and are available on a 25-pin long breakout line. Since we had a tiny bit of space, there are 4 flat tactile switches wired to four GPIOs, that you can use if you want to make a basic user interface. For example, you can use one as a power on\/off button.\u003c\/p\u003e\n\u003cp\u003eComes as a fully assembled display PCB and an additional 2 x 20 GPIO header. Some light soldering is required to attach the 2x20 GPIO header to the HAT, but it's fast and easy for anyone with a soldering iron and solder. You can also swap the plain female header we have with a 'stacky' type that lets you plug in a hat or GPIO cable on top or a slim ultra-low-profile header.\u003c\/p\u003e\n\u003cp\u003eTo make it super easy to use: we've created a custom kernel package based on Notro's awesome framebuffer work, so you can install it over your existing Raspbian (or derivative) images in just a few commands. Our tutorial series shows you how to install the software, play small videos, or display images such as from your PiCam and more!\u003c\/p\u003e\n\u003ch3\u003eRevision History:\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eAs of July 10, 2024\u003c\/strong\u003e – we've updated this PCB with Adafruit Pinguin to make a lovely and legible silkscreen - you may get the new PCB or the older version with vector fonts - both are identical other than the fancy silkscreen.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eDimensions: 65mm x 57mm x 6mm\u003c\/li\u003e\n\u003cli\u003eScreen Dimensions: 55mm x 40mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eResources\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eProduct Tutorial\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!----\u003e","brand":"Adafruit","offers":[{"title":"Default Title","offer_id":53774818279789,"sku":"nsv1787256986682","price":18.48,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0920\/0526\/9869\/files\/adafruit-pitft-22-hat-mini-kit---320-x-240-22-tft---no-touch_1.jpg?v=1787256991"},{"product_id":"mini-rtc-module-for-raspberry-pi","title":"Mini RTC Module for Raspberry Pi","description":"\u003cp\u003eThis is a Mini Real-Time Clock module designed for the Raspberry Pi. It can also be with an Arduino board too!\u003c\/p\u003e\n\u003cp\u003eThis accessory plugs on top of your Pi's GPIO pins and contains a clock chip and a tiny CR927 lithium battery that allows your Raspberry Pi to remember the time.\u003c\/p\u003e\n\u003cp\u003eThe module uses a DS3231 chip which can be coded to have an alarm function (you can see some discussions on this here and here, and there are plenty more on the internet too)\u003c\/p\u003e\n\u003chr\u003e\u003cspan style=\"color: #ff2a00;\"\u003e\u003cstrong\u003eLithium Battery Shipping:\u003c\/strong\u003e\u003c\/span\u003e Due to courier restrictions, this product can only be shipped within the United Kingdom. With this item in your cart, your shipping options will be limited and may cost more than our usual rates. Why?\u003chr\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eTiny GPIO RTC\u003c\/li\u003e\n\u003cli\u003eWorks in 3.3V and 5V\u003c\/li\u003e\n\u003cli\u003eBuilt-in, non-replaceable CR927 battery\u003c\/li\u003e\n\u003cli\u003eSupported by Raspberry Pi and Arduino\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecification\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eDS3231 RTC IC\u003c\/li\u003e\n\u003cli\u003eSelf-adjust 3.3V and 5V\u003c\/li\u003e\n\u003cli\u003eSize: 14x16x12 mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003ch2\u003eInstallation \/ Usage Guide\u003c\/h2\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003eAdding a Real Time Clock to Raspberry Pi\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"The Pi Hut","offers":[{"title":"Default Title","offer_id":53774818312557,"sku":"ykp1787256988151","price":3.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0920\/0526\/9869\/files\/mini-rtc-module-for-raspberry-pi_1.jpg?v=1787256993"},{"product_id":"adafruit-perma-proto-hat-for-pi-mini-kit-no-eeprom","title":"Adafruit Perma-Proto HAT for Pi Mini Kit - No EEPROM","description":"\u003cp\u003eDesign your own Pi HAT, attach custom circuitry and otherwise dress your Pi Zero, A+, B+, Pi 2, Pi 3 and Pi 4 (any Pi with a 2x20 connector) with this jaunty prototyping HAT kit.\u003c\/p\u003e\n\u003cp\u003eTo kick off the Adafruit HAT party, we have this Perma-Proto-inspired plug-in daughter board. It has a grid of 0.1\" prototyping soldering holes for attaching chips, resistors, LED, potentiometers and more. The holes are connected underneath with traces to mimic the solderless breadboards with which you're familiar. There are also long power strips for +3V, +5V and Ground connections to the Pi. Near the top, we break out nearly every pin you could want to connect to the Pi (#26 didn't quite make the cut).\u003c\/p\u003e\n\u003cp\u003eThis is just the basic version of our Perma-Proto HAT.  It comes with a printed circuit board and a single 2 x 20 GPIO Header for Raspberry Pi to put your Perma-Proto on top of your Raspberry Pi (like a nice little hat...) This version does not come with an EEPROM so you can 'stack' it with other HATs without worrying about an EEPROM address collision.\u003c\/p\u003e\n\u003cp\u003eYou can customize your Perma-Proto setup using a standard 2 x 20 stacking header or an extra tall 2 x 20 stacking header. You can also swap out the 2 x 20 header with a slim 2x20 type if you want it to sit closer to the Pi, or an extra tall one if you want it to sit above the USB\/Ethernet ports.\u003c\/p\u003e\n\u003cp\u003eFor the same Proto HAT with EEPROM click here\u003c\/p\u003e\n\u003cp\u003eA bit of light soldering is required to attach the header to the PCB but it's easy work.\u003c\/p\u003e\n\u003cp\u003eThis hat is only compatible with the Raspberry Pi Zero\/A+\/B+\/2\/3\/4\/5 (any Pi with a 2 x 20 connector)! \u003cstrong\u003eIt will not work with the Raspberry Pi Model A or B with a 2x13 connector.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eOur initial version has the +3V and +5V markings in blue, and the GND markings in red, future orders will have these colours swapped to better match a solderless breadboard\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote\u003c\/strong\u003e: Raspberry Pi is \u003cstrong\u003eNOT \u003c\/strong\u003eincluded\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e​Header Dimensions: 5mm x 51mm x 12mm\u003c\/li\u003e\n\u003cli\u003ePCB Dimensions: 66mm x 57mm x 2mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eResources\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eAdafruit Fritzing Library\u003c\/li\u003e\n\u003cli\u003eEagleCAD PCB Files\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!----\u003e","brand":"Adafruit","offers":[{"title":"Default Title","offer_id":53774818345325,"sku":"tqv1787256990016","price":3.36,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0920\/0526\/9869\/files\/adafruit-perma-proto-hat-for-pi-mini-kit---no-eeprom_1.jpg?v=1787256994"},{"product_id":"downgrade-gpio-ribbon-cable-40-pin-to-26-pin-discontinued","title":"Downgrade GPIO Ribbon Cable - 40-pin to 26-pin [Discontinued]","description":"\u003cp\u003eSo you've got a newer 40-pin Raspberry Pi that you want to have work with some old kit or plate or breakout or something and it uses the classic 26-pinout. Very frustrating, it is...unless you have this ingenious 'downgrade' GPIO cable!\u003c\/p\u003e\n\u003cp\u003eThis cable has a 40-pin socket on one end, but only the first 26 pins have a cable and the other end matches any sort of Cobbler or PermaPi or what-have-you.\u003cbr\u003e\u003cbr\u003eThe cable is ~170mm long, and pin #1 is marked with a white wire. \u003cstrong\u003eThis cable is not compatible with the Raspberry Pi Model A or B\u003c\/strong\u003e - It's for the A+ and B+ only!\u003cbr\u003e\u003cbr\u003eAvailable in black - pin #1 is marked with a white stripe!\u003c\/p\u003e\n\u003ch2\u003eSpecification\u003cbr\u003e\n\u003c\/h2\u003e\n\u003cdiv class=\"panel-collapse collapse in\" id=\"tab-technical-details-content\"\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"col-lg-12 col-md-12 col-sm-12 col-xs-12\"\u003e\n\u003cul\u003e\n\u003cli\u003eColour: black\u003c\/li\u003e\n\u003cli\u003e40-pin to 26-pin downgrade cable\u003c\/li\u003e\n\u003cli\u003e173mm x 33mm\u003c\/li\u003e\n\u003cli\u003eWeight: 14.4g\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cul id=\"product-files\"\u003e\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Adafruit","offers":[{"title":"Default Title","offer_id":53774818378093,"sku":"rrl1787256992342","price":2.23,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0920\/0526\/9869\/files\/downgrade-gpio-ribbon-cable---40-pin-to-26-pin-discontinued_1.jpg?v=1787256997"},{"product_id":"temperature-sensor-for-raspberry-pi-discontinued","title":"Temperature Sensor for Raspberry Pi [Discontinued]","description":"\u003cp\u003eThis is a Temperature sensor, designed for the Raspberry Pi, but it also can be used with Arduino.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4;\"\u003eRange in -25°C~100°C\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4;\"\u003eWorks in 3.3V and 5V\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4;\"\u003eSupported Raspberry Pi and Arduino\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4;\"\u003eLM75 IC\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4;\"\u003eI2C port\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Seeed","offers":[{"title":"Default Title","offer_id":53774818410861,"sku":"ngz1787256993024","price":4.08,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0920\/0526\/9869\/files\/temperature-sensor-for-raspberry-pi-discontinued_1.jpg?v=1787256997"},{"product_id":"gpio-ribbon-cable-for-raspberry-pi-40-pin","title":"GPIO Ribbon Cable for Raspberry Pi - 40-pin","description":"\u003cp\u003e\u003cstrong\u003eThe 40-pin GPIO Ribbon Cable connects your Raspberry Pi to external circuits or boards, breaking out the GPIO pins for easy access to power, I2C, SPI, and general input\/output.\u003c\/strong\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003eThat new Raspberry Pi® Model B+ computer you just got has a row of \u003cstrong\u003e2x20\u003c\/strong\u003e pin headers soldered on - those are the GPIO (general purpose input\/output) pins, and for those of us who like to hack electronics, they are where the real fun is. By programming the Pi, you can twiddle those pins high or low, send and receive \u003cstrong\u003eI2C and SPI\u003c\/strong\u003e data, and access the \u003cstrong\u003e3V \u003c\/strong\u003eand \u003cstrong\u003e5V \u003c\/strong\u003epower rails.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThis cable is not compatible with the Raspberry Pi Model B or Model A!\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIf you want to bridge those contacts out onto another PCB, you'll want this cable! It's \u003cstrong\u003e6 inches long\u003c\/strong\u003e and has \u003cstrong\u003e40 socket \u0026amp; wire sets\u003c\/strong\u003e. Pin #1 is marked with a white wire.\u003c\/p\u003e\n\u003cp\u003eIt's available in custom Adafruit Black and is an essential accessory for getting started with your brand new B+!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote\u003c\/strong\u003e: The Raspberry Pi Model A+, Raspberry Pi 2, Raspberry Pi 3, Raspberry Pi 4, and Raspberry Pi 5 are also compatible with this product!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRaspberry Pi not included.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ciframe title=\"YouTube video player\" src=\"https:\/\/www.youtube.com\/embed\/VXgaxtpzoSA?si=qvagZ9kW5-ThHFUl\u0026amp;start=354\" height=\"315\" width=\"560\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e40-pin GPIO cable for Raspberry Pi Model B+ and later versions\u003c\/li\u003e\n\u003cli\u003e6 inches long with 40 socket and wire sets\u003c\/li\u003e\n\u003cli\u003ePin #1 marked with white wire for easy identification\u003c\/li\u003e\n\u003cli\u003eBridges GPIO pins to external PCBs and components\u003c\/li\u003e\n\u003cli\u003eCompatible with Raspberry Pi Model A+, Pi 2, Pi 3, Pi 4, and Pi 5\u003c\/li\u003e\n\u003cli\u003eNot compatible with original Model A or Model B\u003c\/li\u003e\n\u003cli\u003eAdafruit Black colour\u003c\/li\u003e\n\u003cli\u003eEssential for breadboard prototyping and hardware projects\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eProduct dimensions: 150mm x 50mm\u003c\/li\u003e\n\u003cli\u003eWeight: 20.6g\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003ePackage Contents\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1x GPIO Ribbon Cable for Raspberry Pi - 40-pin\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eRaspberry Pi not included.\u003c\/strong\u003e\u003c\/p\u003e","brand":"Adafruit","offers":[{"title":"Default Title","offer_id":53774818443629,"sku":"ewx1787256993366","price":2.15,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0920\/0526\/9869\/files\/gpio-ribbon-cable-for-raspberry-pi---40-pin_1.jpg?v=1787256998"},{"product_id":"raspio-portsplus-gpio-board-discontinued","title":"RasPiO Portsplus GPIO Board [Discontinued]","description":"\u003cp\u003e\u003cspan\u003eThe RasPiO\u003c\/span\u003e\u003csup\u003e®\u003c\/sup\u003e\u003cspan\u003e Portsplus board is designed for the Raspberry Pi 4, Zero, 3B+, 3, 2 and B+. It labels the ports clearly for you so that you don’t need to count pins, and helps you avoid wiring errors and damage.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eYou can slip it over the GPIO header if you want, or hold it next to the header (many people tell us they do this – and this approach will also work for the older models A\/B).\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eRasPiO\u003csup\u003e®\u003c\/sup\u003e\u003cspan\u003e Portsplus has GPIO port numbers on one side and Pin numbers on the other side, so you can use whichever numbering system you prefer.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eYou can use it as an attractive key-fob as well (split-ring not supplied). \u003c\/span\u003eAt just 1mm thick, it leaves plenty of space for attaching your wires. It’s thick enough not to feel flimsy, but thin enough not to be clunky.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e*Please Note*\u003c\/strong\u003e Raspberry Pi not included\u003c\/p\u003e","brand":"RasPiO","offers":[{"title":"Default Title","offer_id":53774818476397,"sku":"aoa1787256994556","price":1.83,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0920\/0526\/9869\/files\/raspio-portsplus-gpio-board-discontinued_1.jpg?v=1787256999"},{"product_id":"piano-hat-discontinued","title":"Piano HAT [Discontinued]","description":"\u003cp\u003eUnlock your inner Mozart with Piano HAT, a mini musical companion for your Raspberry Pi!\u003c\/p\u003e\n\u003cp\u003ePiano HAT is inspired by Zachary Igielman's PiPiano and made with his blessing. We've taken his fabulous idea for a dinky piano add-on for the Raspberry Pi, made it touch-sensitive and added barrels of our trademark Pimoroni polish.\u003c\/p\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003ePlay music in Python, control software synths on your Pi, and take control of hardware synthesizers!\u003c\/p\u003e\n\u003cp\u003eMichael Horne said \u003cem\u003e\"The Piano HAT is, as far as electronics goes, a work of art. It looks slick, feels slick and, with the software library included, acts slick.\"\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003eThe MagPi said Piano HAT was \u003cem\u003e\"a great way to unleash your ivory-tinkling tendencies\"\u003c\/em\u003e and \u003cem\u003e\"a board \u003c\/em\u003e\u003cem\u003efor musical adventures\"\u003c\/em\u003e.\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e16 capacitive touch pads (link each to their own Python function!)\u003c\/li\u003e\n\u003cli\u003e13 piano keys (a full octave)\u003c\/li\u003e\n\u003cli\u003eOctave up\/down buttons\u003c\/li\u003e\n\u003cli\u003eInstrument cycle button (great for use with synthesizers)\u003c\/li\u003e\n\u003cli\u003e16 bright white LEDs (let them light automagically, or take control with Python)\u003c\/li\u003e\n\u003cli\u003e2x Microchip CAP1188 capacitive touch driver chips\u003c\/li\u003e\n\u003cli\u003eUse it to control software or hardware synths over MIDI\u003c\/li\u003e\n\u003cli\u003ePiano HAT pinout\u003c\/li\u003e\n\u003cli\u003eCompatible with Raspberry Pi 3, 2, B+, A+, Zero, and Zero W\u003c\/li\u003e\n\u003cli\u003ePython library\u003c\/li\u003e\n\u003cli\u003eComes fully assembled\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSoftware\u003c\/h2\u003e\n\u003cp\u003eWe've made an ever-so-thorough Python library to control Piano HAT, with a bunch of nifty examples to let you explore its functionality.\u003c\/p\u003e\n\u003cp\u003eThere's a learn to play example that let's you play along as Piano HAT's LEDs show you which keys to press. In no time, you'll be a Chopin for the 21st century.\u003c\/p\u003e\n\u003cp\u003eWe've included a MIDI example that lets you play music with Sunvox, Yoshimi and other software synths, a PyGame example with glorious piano and drum samples and even a true 8-bit synth written in pure Python!\u003c\/p\u003e\n\u003cp\u003eYou can even make Piano HAT output regular MIDI commands via a USB to MIDI adapter and use Piano HAT as a tiny, cheap MIDI controller for your Minimoog Model D (you have one right?)\u003c\/p\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003e\u003cstrong\u003eOur software does not support Raspbian Wheezy.\u003c\/strong\u003e\u003c\/p\u003e","brand":"Pimoroni","offers":[{"title":"Default Title","offer_id":53774818509165,"sku":"jws1787256996886","price":12.81,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0920\/0526\/9869\/files\/piano-hat-discontinued_1.jpg?v=1787257001"},{"product_id":"raspberry-pi-debug-clip-self-solder-kit-discontinued","title":"Raspberry Pi Debug Clip - Self-Solder Kit [Discontinued]","description":"\u003cp\u003eThe Ryantek Debug Clip is similar to common UART Debug cables providing the same serial terminal when used with Raspberry Pi OS. \u003cstrong\u003eThis product comes as a kit of parts that require soldering\/assembly.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eOne of the biggest advantages of using this instead of a cable is that the wiring is already done for you providing less chance of causing any issues to your Raspberry Pi.\u003c\/p\u003e\n\u003cp\u003eYou are also able to then stack on-top other Raspberry Pi add-on's including HATs. Simply push the debug clip onto your Raspberry Pi's GPIO pins and then push a HAT or another add-on on top.\u003c\/p\u003e\n\u003cp\u003eOnly requiring the first 26 pins the debug clip is compatible with all Raspberry Pi Models (excluding compute). It actually only then requires the two UART pins to be available for use!\u003c\/p\u003e\n\u003cp\u003eThe serial terminal provided is a full Linux terminal allowing you to do tasks such as setting up a wi-fi connection, fixing code on a headless device or even program full programs.\u003c\/p\u003e\n\u003cp\u003eThe debug clip can either power your Raspberry Pi via the USB port on your computer (not suggested for Raspberry Pi 4\/3B+) or if you remove the jumper you can then power the Pi from another method such as an external power supply or batteries.\u003c\/p\u003e\n\u003ch2\u003eAssembly Required!\u003c\/h2\u003e\n\u003cp\u003eThis product comes as a kit of components that require soldering\/assembly. USB Cable not included. The original soldering instructions are no longer available, however the product image (and images\/guidance in the below links) should be enough to go on.\u003c\/p\u003e\n\u003ch2\u003eReviews \u0026amp; Articles\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eOriginal Kickstarter Campaign link\u003c\/li\u003e\n\u003cli\u003eRaspberry Pi Spy Review \u0026amp; usage Guide\u003c\/li\u003e\n\u003cli\u003eRabid Inventor - Hacking the RyanTek Debug Clip\u003c\/li\u003e\n\u003cli\u003eCheck out this great review from Kimondo.co.uk\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eCommunity Video\u003c\/h2\u003e\n\u003cp\u003e\u003ciframe title=\"YouTube video player\" src=\"https:\/\/www.youtube.com\/embed\/3cdkcJ2v-Ig\" height=\"315\" width=\"560\" allowfullscreen=\"\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture\" frameborder=\"0\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e","brand":"Ryanteck","offers":[{"title":"Default Title","offer_id":53774818541933,"sku":"oqc1787256997900","price":5.25,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0920\/0526\/9869\/files\/raspberry-pi-debug-clip---self-solder-kit-discontinued_1.jpg?v=1787257002"},{"product_id":"adafruit-capacitive-touch-hat-for-raspberry-pi-mini-kit-mpr121","title":"Adafruit Capacitive Touch HAT for Raspberry Pi - Mini Kit - MPR121","description":"\u003cp\u003eThis touch-able add-on HAT for Raspberry Pi will inspire your next interactive project with 12 capacitive touch sensors. Capacitive touch sensing works by detecting when a person (or animal) has touched one of the sensor electrodes. Capacitive touch sensing used for stuff like touch-reactive tablets and phones, as well as control panels for appliances, which is where you may have used it before. This HAT allows you to create electronics that can react to human touch, with up to 12 individual sensors.\u003c\/p\u003e\n\u003cp\u003eThe HAT has 12 'figure 8' holes in it that can be gripped onto with alligator clip cables. Attach one side of the clip to the HAT and the other side to something electrically conductive (like metal) or full of water (like vegetables or fruit!) Then start up our handy Python library code to detect when the object is touched. That's pretty much it, very easy! For advanced users, you can also solder to a pad to make a slimmer \u0026amp; more permanent connection.\u003c\/p\u003e\n\u003cp\u003eWorks great with any Raspberry Pi that has a 2 x 20 connector This HAT can be used with Model A or Model B but requires the purchase\/soldering of an extra-tall 2 x 13 header instead of the 2 x 20 included.\u003c\/p\u003e\n\u003cp\u003eCheck out the MPR121 sensor guide for CircuitPython and Python usage!. We have examples for reading touches, turning touches into keyboard KeyUp\/KeyDown presses (so you can make a veggie keyboard) as well as an audio player that will play a sound per sensor (fruit drums!)\u003c\/p\u003e\n\u003cp\u003eEach order comes with a Capacitive Touch HAT and a 2x20 socket header. You'll need to do some light through-hole soldering to attach the headers onto the HAT circuit board, but it's easy to do with basic soldering tools like a soldering iron and rosin core electronics solder. You'll also likely want to pick up a 12-pack of alligator clips!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePlease note! This kit does NOT come with Raspberry Pi, alligator clips, speakers, or delicious fruit!\u003c\/strong\u003e However, we do have all of those in the store. Well, all except fruit - despite being called Adafruit, we do not actually sell fruit. \u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003eRevision History:\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eAs of July 10, 2024\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003e– we've updated this PCB with Adafruit Pinguin to make a lovely and legible silkscreen - you may get the new PCB or the older version with vector fonts - both are identical other than the fancy silkscreen.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e57mm x 65mm x 3mm\u003c\/li\u003e\n\u003cli\u003eWeight: 10g\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eResources\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eEagleCAD PCB files\u003c\/li\u003e\n\u003cli\u003eAdafruit Fritzing Library\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!----\u003e","brand":"Adafruit","offers":[{"title":"Default Title","offer_id":53774818574701,"sku":"ret1787257000620","price":10.66,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0920\/0526\/9869\/files\/adafruit-capacitive-touch-hat-for-raspberry-pi---mini-kit---mpr121_1.jpg?v=1787257005"},{"product_id":"gpio-to-serial-port-adapter-for-raspberry-pi-discontinued","title":"GPIO to Serial Port Adapter for Raspberry Pi [Discontinued]","description":"\u003cp\u003eTh\u003cspan\u003ee GPIO to Serial Port module is specifically designed for Raspberry Pi. The module uses the Maxim MAX232 chip and DB9 port. So the user doesn't need to connect Dupont Line and can avoid wrong wiring.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e  Maxim MAX232 on chip\u003c\/li\u003e\n\u003cli\u003e  DB9 port\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePort?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e  Raspberry Pi connection port\u003c\/li\u003e\n\u003cli\u003e  DB9 port\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Parameters?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e  Working voltage: 5V\u003c\/li\u003e\n\u003cli\u003e  Two Drivers and Two Receivers\u003c\/li\u003e\n\u003cli\u003e  Operates Up To 120 kbit\/s\u003c\/li\u003e\n\u003cli\u003e  Low Supply Current . . . 8 mA Typical\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eTypical Application?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e  Interface Translation\u003c\/li\u003e\n\u003cli\u003e  Multidrop RS-232 Networks\u003c\/li\u003e\n\u003cli\u003e  Low-Power Modems\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e","brand":"Seeed","offers":[{"title":"Default Title","offer_id":53774818607469,"sku":"ixv1787257002959","price":4.14,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0920\/0526\/9869\/files\/gpio-to-serial-port-adapter-for-raspberry-pi-discontinued_1.jpg?v=1787257007"},{"product_id":"raspio-gpio-ruler-discontinued","title":"RasPiO GPIO Ruler [Discontinued]","description":"\u003cp\u003e\u003cstrong\u003eThe RasPiO\u003csup\u003e®\u003c\/sup\u003e GPIO Ruler!\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eis the ideal quick reference for RPi.GPIO hacking on the Raspberry Pi in Python\u003c\/li\u003e\n\u003cli\u003ehas all the most commonly used RPi.GPIO code, which can be hard to remember\u003c\/li\u003e\n\u003cli\u003eis a Raspberry Pi port identification aid (GPIO numbers and Alt functions)\u003c\/li\u003e\n\u003cli\u003ecan be used as a ruler (cm\/inches)\u003c\/li\u003e\n\u003cli\u003efits easily in a pencil case, toolbox or desk tidy\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e*Please Note*\u003c\/strong\u003e Raspberry Pi not included\u003c\/p\u003e","brand":"RasPiO","offers":[{"title":"Default Title","offer_id":53774818640237,"sku":"kkp1787257003364","price":2.48,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0920\/0526\/9869\/files\/raspio-gpio-ruler-discontinued_1.jpg?v=1787257008"},{"product_id":"explorer-phat","title":"Explorer pHAT","description":"\u003cp\u003eExplorer pHAT is the perfect prototyping side-kick for your Raspberry Pi!\u003c\/p\u003e\n\u003cp\u003eA more diminutive version of our popular Explorer Hat Pro, it's cheaper and designed to fit perfectly on a Raspberry Pi Zero!\u003c\/p\u003e\n\u003cp\u003eWe've added a heap of useful input and output options that will take your projects to the next level. Great for driving motors, using analog sensors, and interfacing with 5V systems (like Arduino).\u003c\/p\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003ePerfect for building a tiny robot, or use it with our Explorer HAT Pro parts kit to prototype all sorts of circuits with its LEDs, analog dials, and temperature sensor.\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eFour buffered 5V tolerant inputs (perfect for Arduino compatibility)\u003c\/li\u003e\n\u003cli\u003eFour powered 5V outputs (up to 500mA total across all four channels)\u003c\/li\u003e\n\u003cli\u003eFour analog inputs\u003c\/li\u003e\n\u003cli\u003eTwo H-bridge motor drivers (up to 200mA per channel; soft PWM control)\u003c\/li\u003e\n\u003cli\u003eExplorer pHAT pinout\u003c\/li\u003e\n\u003cli\u003eCompatible with Raspberry Pi 3, 2, B+, A+, Zero, and Zero W\u003c\/li\u003e\n\u003cli\u003ePython library\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eFemale headers require soldering\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003ch2\u003eSoftware\u003c\/h2\u003e\n\u003cp\u003eExplorer pHAT uses the same easy-to-use Python library as Explorer HAT Pro, that includes a bunch of examples to demonstrate Explorer pHAT's functions.\u003c\/p\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003e\u003cstrong\u003eOur software does not support Raspbian Wheezy.\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch2\u003eNotes\u003c\/h2\u003e\n\u003cp\u003eThe inputs use a 5-channel buffer that will accept anything from 2V-5V as logic high.\u003c\/p\u003e","brand":"Pimoroni","offers":[{"title":"Default Title","offer_id":53774818673005,"sku":"ypa1787257003922","price":6.57,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0920\/0526\/9869\/files\/explorer-phat_1.jpg?v=1787257008"},{"product_id":"scroll-phat-discontinued","title":"Scroll pHAT [Discontinued]","description":"\u003cp\u003eBazinga! Let your Pi talk back with this slick little 11 x 5 LED matrix pHAT.\u003cbr\u003e\u003c\/p\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003e\u003cspan\u003eAt the heart of Scroll pHAT is ISSI's \u003c\/span\u003eIS31FL3730\u003cspan\u003e matrix LED driver chip. It can drive multiple LED matrix and segment display formats and also supports controllable display brightness.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eScroll pHAT has a matrix of 5x11 (55 total) bright white LEDs that is ideal for scrolling messages, showing graphs, and drawing pictures. Use it to output your IP address, show CPU usage, make a scrolling name badge, or play pong or snake!\u003c\/p\u003e\n\u003cp\u003eGoes together great with Enviro pHAT for graphing sensor values, or with Zero LiPo, a Pi Zero and a LiPo battery for a completely wireless name badge!\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e5x11 (55 total) bright white LEDs\u003c\/li\u003e\n\u003cli\u003eMatrix-wide brightness control (although not individual brightness control)\u003c\/li\u003e\n\u003cli\u003eIS31FL3730 matrix driver chip\u003c\/li\u003e\n\u003cli\u003eCompatible with Raspberry Pi 3, 2, B+, A+, Zero, and Zero W\u003c\/li\u003e\n\u003cli\u003ePython library\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eFemale header requires soldering\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSoftware\u003c\/h2\u003e\n\u003cp\u003eOur Scroll pHAT Python library makes controlling it really easy, and there's a veritable smorgasbord of examples including a binary clock, CPU activity readout, Conway's Game of Life, weather displays, and scrolling messages.\u003c\/p\u003e\n\u003cp\u003eAll it takes to scroll text on Scroll pHAT is about a dozen lines of code. Nifty!\u003c\/p\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003e\u003cstrong\u003eOur software does not support Raspbian Wheezy.\u003c\/strong\u003e\u003c\/p\u003e","brand":"Pimoroni","offers":[{"title":"Default Title","offer_id":53774818738541,"sku":"vnt1787257004718","price":6.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0920\/0526\/9869\/files\/scroll-phat-discontinued_1.jpg?v=1787257009"},{"product_id":"protozero-raspberry-pi-zero-prototyping-board-discontinued","title":"ProtoZero Raspberry Pi Zero Prototyping Board [Discontinued]","description":"\u003cp\u003eThe ProtoZero is designed to make it easy to move your messy Raspberry Pi breadboard projects to a PCB.\u003c\/p\u003e\n\u003cp\u003eSimply add your components to the prototyping area, connect GPIO, power and GND with prototyping wire as required - solder it all up and away you go!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKey Features\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4;\"\u003eFull breakout of the PiZero's 40-Pin GPIO header, ready to connect to your project\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4;\"\u003e154 holes of prototyping area - set in lanes of 3+ to make it even easier to connect your components to the Pi\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4;\"\u003eLabelled GPIO numbers and printed lanes on both sides on the board\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4;\"\u003eHigh-quality ENIG (Electroless nickel immersion gold) PCB plating\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4;\"\u003eFemale GPIO header included\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003e\u003cspan style=\"line-height: 1.5;\"\u003ePlease Note - This product comes in kit form: requires soldering of the GPIO header\u003c\/span\u003e\u003c\/em\u003e\u003c\/p\u003e","brand":"The Pi Hut","offers":[{"title":"Default Title","offer_id":53774818771309,"sku":"prc1787257005533","price":3.45,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0920\/0526\/9869\/files\/protozero-raspberry-pi-zero-prototyping-board-discontinued_1.jpg?v=1787257010"},{"product_id":"pi-ezconnect-terminal-block-breakout-hat-discontinued","title":"Pi-EzConnect Terminal Block Breakout HAT [Discontinued]","description":"\u003cp\u003e\u003cstrong\u003eThe Pi-EzConnect GPIO HAT lets you connect electronics to your Raspberry Pi using screw terminals, offering a solderless, clearly labelled, and protected way to access every GPIO pin.\u003c\/strong\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003eWith the \u003cstrong\u003ePi-EzConnect\u003c\/strong\u003e you can connect all sorts of electronics to a single Raspberry Pi with no soldering or breadboarding! This HAT has \u003cstrong\u003escrew-terminals\u003c\/strong\u003e for each pin on the Pi Header\u003c\/p\u003e\n\u003cp\u003eMuch more information available on the datasheet and on the Alchemy Power website!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePlease note\u003c\/strong\u003e: This is compatible with the Pi 5, Pi 4, Raspberry Pi 3 Model B, Pi 2 Model B, Model B+, and Model A+  \u003cstrong\u003eNot for use with '2x13' Raspberry Pi models\u003c\/strong\u003e such as the Pi 1 Model B or A.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRaspberry Pi, sensors and cables not included.\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSolderless or soldered connections for all GPIO’s on a Raspberry Pi\u003c\/li\u003e\n\u003cli\u003eMini proto area for adding components\u003c\/li\u003e\n\u003cli\u003eAdd standard male or female headers for breadboard like functionality\u003c\/li\u003e\n\u003cli\u003ePower (both 5V and 3.3V) as well as ground connections available\u003c\/li\u003e\n\u003cli\u003eCompact footprint – fits easily on top of a Raspberry Pi\u003c\/li\u003e\n\u003cli\u003eFully documented pins – easily connect to pin numbers or GPIO number without referring to external charts\u003c\/li\u003e\n\u003cli\u003eProtection: Resettable 8V, 1.6A fuse for 3.3V and 5V power\u003c\/li\u003e\n\u003cli\u003eHeader connections: Can use 0.1\" (2.54mm) spaced headers, male or female\u003c\/li\u003e\n\u003cli\u003eStandoff connections: Matches Raspberry Pi model A+, B+, and Pi 2\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eProduct Dimensions: 68.8mm x 56.6mm x 23.3mm\u003c\/li\u003e\n\u003cli\u003eWeight: 34.1g\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eResources\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eDatasheet\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003ePackage Contents\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1x Pi-EzConnect Terminal Block Breakout HAT\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eRaspberry Pi, sensors and cables not included.\u003c\/strong\u003e\u003c\/p\u003e","brand":"Adafruit","offers":[{"title":"Default Title","offer_id":53774818804077,"sku":"prb1787257008353","price":15.36,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0920\/0526\/9869\/files\/pi-ezconnect-terminal-block-breakout-hat-discontinued_1.jpg?v=1787257013"},{"product_id":"raspberry-pi-sense-hat-v2","title":"Raspberry Pi Sense HAT V2","description":"\u003cp\u003eThe Raspberry Pi Sense HAT \u003cstrong\u003eV2\u003c\/strong\u003e is the perfect product to learn about programming and how we interact with the world around us. With its full array of sensors, the Sense HAT was originally developed for use on the International Space Station, as part of the educational Astro Pi programme run by the Raspberry Pi Foundation in partnership with the European Space Agency.\u003c\/p\u003e\n\u003cp\u003eIt is well suited to many projects that require position, motion, orientation, or environmental sensing. The Sense HAT is powered by the Raspberry Pi computer to which it is connected.\u003c\/p\u003e\n\u003cp\u003eAn officially supported Python library provides access to all of the onboard sensors, the LED matrix, and the joystick. The Sense HAT is compatible with any Raspberry Pi computer with a 40-pin GPIO header.\u003c\/p\u003e\n\u003cp\u003eHAT standoffs and fixings included! New Sense HAT Case for Raspberry Pi \u003cstrong\u003e4\u003c\/strong\u003e is now available!\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cp\u003eThe Raspberry Pi Sense HAT V2 is attached on top of the Raspberry Pi via the 40-pin GPIO pins (which provide the data and power interface) to create an ‘Astro Pi’.\u003c\/p\u003e\n\u003cp\u003eThe Sense HAT has several integrated circuit based sensors can be used for many different types of experiments, applications, and even games.\u003cbr\u003e\u003cbr\u003eThe sensors enable you to read:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eGyroscope\u003c\/li\u003e\n\u003cli\u003eAccelerometer\u003c\/li\u003e\n\u003cli\u003eMagnetometer\u003c\/li\u003e\n\u003cli\u003eTemperature\u003c\/li\u003e\n\u003cli\u003eBarometric pressure\u003c\/li\u003e\n\u003cli\u003eHumidity\u003c\/li\u003e\n\u003cli\u003eColour and brightness\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cp\u003eThe LED Matrix enables you to display the data from the various sensors, it can show you which way is geomagnetic North by programming a compass using the magnetometer or simply be used to play games like Tetris, Pong and Snake with the joystick. The joystick can also be used to enable a human user to interact with the programs running on the Raspberry Pi Sense HAT.\u003c\/p\u003e\n\u003ch2\u003eSpecification\u003c\/h2\u003e\n\u003ctable width=\"644\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd width=\"238\"\u003e\u003cstrong\u003ePressure\/temperature sensor\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd width=\"406\"\u003eSTMicro LPS25HB\u003cbr\u003e260 to 1260 hPa absolute pressure range\u003cbr\u003e24-bit pressure data output\u003cbr\u003e0 to +65°C accurate temperature measurement range (±2°C)\u003cbr\u003e16-bit temperature data output\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eHumidity temperature sensor\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd width=\"406\"\u003eSTMicro HTS221\u003cbr\u003e0 to 100% relative humidity range\u003cbr\u003e15 to 40°C accurate temperature measurement range (±0.5°C)\u003cbr\u003e16-bit data output\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eIMU\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd width=\"406\"\u003eSTMicro LSM9DS1\u003cbr\u003eAccelerometer\/gyroscope\/magnetometer\u003cbr\u003e±16g acceleration measurement range\u003cbr\u003e±16 gauss magnetometer measurement range\u003cbr\u003e±2000dps gyroscope measurement range\u003cbr\u003e16-bit resolution for each measurement channel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eColour Sensor\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd width=\"406\"\u003eTCS3400 RGB colour and brightness sensor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eLED matrix\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd width=\"406\"\u003e8×8 RGB LED display\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eJoystick\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd width=\"406\"\u003e5-button miniature joystick with up, down, left, right,\u003cbr\u003eand middle-click\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"Raspberry Pi","offers":[{"title":"Default Title","offer_id":53774818836845,"sku":"yiz1787257011001","price":22.75,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0920\/0526\/9869\/files\/raspberry-pi-sense-hat-v2_1.jpg?v=1787257015"},{"product_id":"raspio-duino-discontinued","title":"RasPiO Duino [discontinued]","description":"\u003cp\u003eThe RasPiO\u003csup\u003e®\u003c\/sup\u003e Duino is a small plug-on board for Raspberry Pi. It has similar functionality to an Arduino Uno, but is fully programmable from the Raspberry Pi. Once programmed, it can be removed from the Pi and used on its own.\u003c\/p\u003e\n\u003cp\u003eIt can also be used interactively with the Pi. The Pi’s GPIO ports are also broken out on the board as well. There’s a 72 point prototyping area, with GND, 3V3 and 5V rails, where you can add your own components.\u003c\/p\u003e\n\u003cp\u003eAs with other RasPiO\u003csup\u003e®\u003c\/sup\u003e boards, all the ports are clearly labelled and there are lots of options. Each of the useful pins on the ATMega are broken out to a cluster of three holes. Male and female headers are provided, so you can connect whatever you like to your RasPiO\u003csup\u003e®\u003c\/sup\u003e Duino.\u003c\/p\u003e\n\u003cp\u003ePlease Note - RasPiO\u003csup\u003e®\u003c\/sup\u003e Duino is an easy, low-cost introduction to Arduino programming on the Raspberry Pi and comes in a kit form (soldering required)\u003c\/p\u003e\n\u003ch3\u003eHelpful Links:\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003eRasPiO\u003csup\u003e®\u003c\/sup\u003e Duino Assembly Guide\u003c\/li\u003e\n\u003cli\u003eRasPiO\u003csup\u003e®\u003c\/sup\u003e Duino Software Setup Video\u003c\/li\u003e\n\u003cli\u003eRasPiO\u003csup\u003e®\u003c\/sup\u003e Duino Full User Guide \u0026amp; Arduino Programming Instructions\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003e\u003c\/h3\u003e\n\u003ch3\u003eHow Long to Build and Get Going?\u003c\/h3\u003e\n\u003cp\u003eRasPiO\u003csup\u003e®\u003c\/sup\u003e Duino takes about 30 minutes to build, if you’ve done some soldering before.\u003c\/p\u003e\n\u003cp\u003eOnce built, the software installation on the Pi (internet connection needed) will take about another 15 minutes, then you should be ready to go.\u003c\/p\u003e\n\u003cp\u003eThere’s an LED on pin 13, so the standard ‘blink’ sketch should work unchanged, once you’ve set everything up. Full instructions and some examples are provided on Github.\u003c\/p\u003e","brand":"RasPiO","offers":[{"title":"Default Title","offer_id":53774819066221,"sku":"zhn1787257013806","price":8.04,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0920\/0526\/9869\/files\/raspio-duino-discontinued_1.jpg?v=1787257018"},{"product_id":"adafruit-dc-stepper-motor-hat-for-raspberry-pi-mini-kit","title":"Adafruit DC \u0026 Stepper Motor HAT for Raspberry Pi - Mini Kit","description":"\u003cp\u003e\u003cem\u003e\u003cstrong\u003eDrive your next robot or motion project with the Adafruit DC + Stepper Motor HAT! Control 4 DC or 2 stepper motors via I2C with powerful TB6612 drivers, built-in protection, and no soldering required — plug in and go!\u003c\/strong\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003eLet your robotic dreams come true with the new DC+Stepper Motor HAT from Adafruit. This Raspberry Pi add-on is perfect for any motion project, as it can drive up to 4 DC or 2 Stepper motors with full PWM speed control.\u003c\/p\u003e\n\u003cp\u003eRaspberry Pi and motors are not included. Works with any and all Raspberry Pi computers with 2x20 connection port.\u003c\/p\u003e\n\u003cp\u003eSince the Raspberry Pi does not have a lot of PWM pins, we use a fully-dedicated PWM driver chip onboard to both control motor direction and speed. This chip handles all the motor and speed controls over I2C. Only two pins (SDA \u0026amp; SCL) are required to drive the multiple motors, and since it's I2C you can also connect any other I2C devices or HATs to the same pins.\u003c\/p\u003e\n\u003cp\u003eMotors are controlled by TB6612 MOSFET drivers with 1.2A per channel current capability (you can draw up to 3A peak for approx 20ms at a time), a big improvement over L293D drivers and there are built-in flyback diodes as well.\u003c\/p\u003e\n\u003cp\u003eWe even had a little space so we added a polarity protection FET on the power pins and a bit of prototyping area. And the HAT is assembled and tested here at Adafruit with the 2x20 connector and terminal blocks already soldered on, so this is a plug-and-play, no soldering required motor control kit!\u003c\/p\u003e\n\u003cp\u003eComes with an assembled \u0026amp; tested HAT, with terminal blocks already soldered on, and 2x20 lifter header so it will clear the ports on a Raspberry Pi computer. No soldering required!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePlease note:\u003c\/strong\u003e Raspberry Pi, motors, and battery pack are not included, and the terminal blocks included with your product may vary in colour.\u003c\/p\u003e\n\u003cp\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/lFjtnCsFcT8?si=yToN5dwMIbyWaF53\u0026amp;start=87\" title=\"YouTube video player\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cul id=\"product-files\"\u003e\u003c\/ul\u003e\n\u003cdiv class=\"row\"\u003e\n\u003ch2 class=\"col-lg-2 col-md-3 col-sm-3 col-xs-4\"\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e4 H-Bridges: TB6612 chipset provides 1.2A per bridge with thermal shutdown protection, internal kickback protection diodes. Can run motors on 4.5VDC to 13.5VDC.\u003c\/li\u003e\n\u003cli\u003eUp to 4 bidirectional DC motors with individual 8-bit speed selection (so, about 0.5% resolution)\u003c\/li\u003e\n\u003cli\u003eUp to 2 stepper motors (unipolar or bipolar) with single coil, double coil, interleaved or micro-stepping.\u003c\/li\u003e\n\u003cli\u003eBig terminal block connectors to easily hook up wires (18-26AWG) and power\u003c\/li\u003e\n\u003cli\u003ePolarity-protected 2-pin terminal block and jumper to connect external 5-12VDC power\u003c\/li\u003e\n\u003cli\u003eWorks best with Raspberry Pi's with 2x20 connectors: A+, B+, Pi 2, Pi 3 Pi 4, Pi 5, Pi Zero, etc....but can be used with first-generation model A or B if you purchase a 2x13 extra-tall header and solder that instead of the 2x20\u003c\/li\u003e\n\u003cli\u003eInstall the easy-to-use Python library, check out the examples, and you're ready to go!\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eDimensions w\/ components: 65mm x 56mm x 13mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eResources\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eDatasheet\u003c\/li\u003e\n\u003cli\u003eTutorial\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 class=\"col-lg-2 col-md-3 col-sm-3 col-xs-4\"\u003ePackage Contents\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1x Adafruit DC \u0026amp; Stepper Motor HAT for Raspberry Pi - Mini Kit\u003c\/li\u003e\n\u003cli\u003e1x 20-pin header\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Adafruit","offers":[{"title":"Default Title","offer_id":53774834958701,"sku":"agv1787257419531","price":13.61,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0920\/0526\/9869\/files\/adafruit-dc-stepper-motor-hat-for-raspberry-pi---mini-kit_1.jpg?v=1787257424"},{"product_id":"adafruit-rgb-matrix-hat-rtc-for-raspberry-pi-mini-kit","title":"Adafruit RGB Matrix HAT + RTC for Raspberry Pi - Mini Kit","description":"\u003cdiv class=\"panel-collapse collapse in\" id=\"tab-technical-details-content\"\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"col-lg-12 col-md-12 col-sm-12 col-xs-12\"\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eThe Adafruit RGB Matrix HAT lets you easily create bright, colourful LED matrix displays using your Raspberry Pi Model Zero, A+, B+, 2, 3, or 4. It connects directly to your Pi and works with popular HUB75 RGB matrices to build scrolling signs, clocks, or mini LED walls.\u003c\/strong\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003eYou can now create a dazzling display with your Raspberry Pi Model Zero\/A+\/B+\/Pi 2\/3\/Pi 4 with the Adafruit RGB Matrix HAT. This HAT plugs into your Raspberry Pi and makes it super easy to control RGB matrices such as those we stock in the shop and create a colourful scrolling display or mini LED wall with ease.\u003c\/p\u003e\n\u003cp\u003eCurrently, the Matrix driving software library does not support the Pi 5 (and no ETA when it might be done) so best to use a Pi 4 until Pi 5 support is complete.\u003c\/p\u003e\n\u003cp\u003eThis HAT is our finest to date, full of some really great circuitry. Let me break it down for you:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSimple design\u003c\/strong\u003e - plug in power, plug in IDC cable, run our Python code!\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower protection circuitry\u003c\/strong\u003e - you can plug a 5V 4A wall adapter into the HAT, and it will automatically protect against negative, over or under-voltages! Yay for no accidental destruction of your setup.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOnboard level shifters\u003c\/strong\u003e to convert the RasPi's 3.3V to 5.0V logic for clean and glitch free matrix driving\u003cbr\u003eDS1307 Real Time Clock can keep track of time for the Pi even when it is rebooted or powered down, to make for really nice time displays\u003c\/li\u003e\n\u003cli style=\"font-weight: bold;\"\u003e\u003cstrong\u003eNo soldering required!\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eWorks with any of our 16x32, 32x32, 32x64 or 64x64 RGB LED Matrices with HUB75 connections. You can even chain multiple matrices together for a longer display, you can chain as many as you like but the bigger the display the harder it is on the Pi so keep that in mind! We don't recommend more than 64x128 pixel setups. As of October 2018, we now sell a version that can be used with 64x64 pixel matrices that have an 'E' address pin!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePlease note:\u003c\/strong\u003e this HAT is only for use with HUB75 type RGB Matrices. Not for use with NeoPixel, DotStar, or other 'addressable' LEDs.\u003c\/p\u003e\n\u003cp\u003eEach order comes with a HAT PCB with all parts assembled and a 'riser' that will let you extend the 2x20 connector, so the HAT clears any components or heat sinks. \u003cstrong\u003eA CR1220 coin cell is not included to make air shipping easier, please order one separately if you do not have one and would like to use the real time clock.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA 5V power supply is also required, not included, for powering the matrix itself. The Pi cannot do it due to the high currents. To calculate the max current of your matrix set up, multiply the width of all the chained matrix by 0.12 : A 32 pixel wide matrix needs 32*0.12 = 3.85A, so pick up a 5V 4A power supply.\u003c\/p\u003e\n\u003cp\u003ePlease note that the following is \u003cstrong\u003eNOT \u003c\/strong\u003eincluded, but please select to purchase:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\nACR1220 coin cell\u003c\/li\u003e\n\u003cli\u003e\nRaspberry Pi (works with any non-5 Pi that has a 2x20 connector)\u003c\/li\u003e\n\u003cli\u003eRGB Matrix\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePCB may be black or blue as we work through batches of stock.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/Denn96lpkvY?si=iXMD_g0hS_EqLG1W\" title=\"YouTube video player\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003ch2\u003eResources\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eDatasheet\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eRevision History\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli style=\"list-style-type: none;\"\u003e\n\u003cul\u003e\n\u003cli\u003eAs of August 8, 2025 - The terminal block is now 10mm tall, and the PCB comes in blue.\u003c\/li\u003e\n\u003cli\u003eAs of June 28, 2024 - Now comes in Adafruit black with pre-soldered terminal block and IDC socket connector. No soldering required to get going immediately\u003c\/li\u003e\n\u003cli\u003eAs of January 17, 2023 – we've updated this PCB with Adafruit Pinguin to make a lovely and legible silkscreen - you may get the new PCB or the older version with vector fonts - both are identical other than the fancy silkscreen.\u003c\/li\u003e\n\u003cli\u003eAs of October 2018, we now sell a version that can be used with 64x64 pixel matrices that have an 'E' address pin, default is Raspberry Pi GPIO #24. You can select address E on pin 8 or 16 by soldering closed a jumper\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003ePackage Contents\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1x Adafruit RGB Matrix HAT + RTC for Raspberry Pi - Mini Kit\u003c\/li\u003e\n\u003cli\u003e1x 20-pin header\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cul id=\"product-files\"\u003e\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Adafruit","offers":[{"title":"Default Title","offer_id":53774834991469,"sku":"odj1787257420107","price":18.48,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0920\/0526\/9869\/files\/adafruit-rgb-matrix-hat-rtc-for-raspberry-pi---mini-kit_1.jpg?v=1787257425"},{"product_id":"adafruit-dpi-tft-kippah-for-raspberry-pi-with-touch-support","title":"Adafruit DPI TFT Kippah for Raspberry Pi with Touch Support","description":"\u003cp\u003e\u003cem\u003e\u003cstrong\u003eThe Adafruit DPI Kippah for Raspberry Pi (with Resistive Touch Support) lets you connect a 5” or 7” TFT directly to your Pi’s GPIO — no HDMI decoder needed! It delivers fast, 18-bit colour with full graphics acceleration and optional touchscreen input.\u003c\/strong\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eUsing GPIO 2–21, it replaces HDMI output but keeps a few pins (22–27) and USB free. Perfect for compact Pi projects needing a native display connection.\u003c\/strong\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003eA TFT panel connected to a Raspberry Pi without the use of an HDMI decoder? What is this sorcery??? It's the DPI Kippah from Adafruit! This HAT-like* board snaps onto a Raspberry Pi B+, A+, Pi 2, Pi 3 or Zero and with a little software configuration, allows you to have what normally would go out the HDMI port come up on a nice little flat screen. *It's not technically a HAT due to the lack of an on-board EEPROM, but it's the same shape as a Pi HAT, and it's a covering of sorts, so we call it a kippah.\u003c\/p\u003e\n\u003cp\u003eThis is the Kippah with resistive touch support. If you don't need a touchscreen, then here's our super low-cost version of the Kippah without the USB touchscreen capability.\u003c\/p\u003e\n\u003cp\u003eCompared to our lovely HDMI backpacks, you don't have the extra cost or expense of an HDMI encoder\/decoder. And you get a nice ultra-fast 18-bit colour display with optional touch support. We tested it, and it works great with our 5\" and 7\" displays at 800x480. This display is 'native' so it gets all the graphics acceleration capabilities, instant refresh, etc. you would get from an HDMI display\u003c\/p\u003e\n\u003cp\u003eOK so, exciting right? But, what's the catch? The catch is this add-on board uses nearly every pin available on the Raspberry Pi and those pins are hardcoded, they cannot be moved or rearranged. The pins used are GPIO 2 through 21 inclusive. That means you don't get the UART RX\/TX pins (no console cable) and you don't get the standard user I2C pins, the EEPROM I2C pins, or hardware SPI pins. You do get to use pins #22, #23, #24, #25, #26 and #27, and the USB ports are fine to use too.\u003c\/p\u003e\n\u003cp\u003eThe other catch is that this display replaces the HDMI\/NTSC output, so you can't have the DPI HAT and HDMI working at once, nor can you 'flip' between the two.\u003c\/p\u003e\n\u003cp\u003eAlso, there's no PWM's available so you can't have precision backlight control unless you somehow rig up an external PWM generator with a 555 or something. Finally, we did test this setup with a straight-up Raspbian and after the software installs, it works great. However, we don't guarantee it will work with any other Raspberry Pi operating system or setup.\u003c\/p\u003e\n\u003cp\u003eThat said, if you don't need all the Pi GPIO's, it's very easy to add a high quality display. Pick and choose whether you want a touch-screen or not, then choose the size of the display - 5\" or 7\" is best. You can also grab an FPC extension board and extend the display away from the Pi. For power-users, this is a very nice little accessory.\u003c\/p\u003e\n\u003cp\u003eComes as one fully assembled and tested DPI Kippah circuit board. You may need a soldering iron to adjust the backlight by soldering closed a PCB jumper (check the tutorial on this).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTFT display, USB micro-B cable, FPC extension cable, bent wire stand, and Raspberry Pi not included\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/8QORY5k3244?si=Al1x8qV1vJl5D3Bq\u0026amp;start=307\" title=\"YouTube video player\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e57mm x 65mm x 5.5mm\u003c\/li\u003e\n\u003cli\u003eWeight: 15.4g\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eResources\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eDatasheet\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eRevision History\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli style=\"list-style-type: none;\"\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eAs of May 15, 2024\u003c\/strong\u003e We updated the backlight controller and this PCB with Adafruit Pinguin to make a lovely and legible silkscreen - you may get the new PCB or the older version with vector fonts.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003ePackage Contents\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1x Adafruit DPI TFT Kippah for Raspberry Pi with Touch Support\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul id=\"product-files\"\u003e\u003c\/ul\u003e","brand":"Adafruit","offers":[{"title":"Default Title","offer_id":53774835057005,"sku":"fkx1787257421945","price":11.71,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0920\/0526\/9869\/files\/adafruit-dpi-tft-kippah-for-raspberry-pi-with-touch-support_1.jpg?v=1787257426"},{"product_id":"adafruit-dpi-tft-kippah-for-raspberry-pi","title":"Adafruit DPI TFT Kippah for Raspberry Pi","description":"\u003cp\u003e\u003cem\u003e\u003cstrong\u003eThe Adafruit DPI Kippah for Raspberry Pi (No Touchscreen) lets you connect a 5\" or 7\" TFT directly to your Pi’s GPIO — no HDMI decoder needed! It delivers fast, full-colour 18-bit video with native graphics acceleration and generates its own backlight voltage from the Pi’s 5 V power.\u003c\/strong\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003eThis is the Kippah with no touchscreen support. We have a version with touchscreen capabilities if that's your thing!\u003c\/p\u003e\n\u003cp\u003eCompared to our lovely HDMI backpacks, you don't have the extra cost or expense of an HDMI encoder\/decoder. And you get a nice ultra-fast 18-bit colour display with optional touch support. We tested it, and it works great with our 5\" and 7\" displays at 800x480. This display is 'native' so it gets all the graphics acceleration capabilities, instant refresh, etc. you would get from an HDMI display. The Kippah will also generate the backlight drive voltage (up to ~24V) from the 5V USB power on the Raspberry Pi\u003c\/p\u003e\n\u003cp\u003eOK so, exciting right? But, what's the catch? The catch is this add-on board uses nearly every pin available on the Raspberry Pi and those pins are hardcoded, they cannot be moved or rearranged. The pins used are GPIO 2 through 21 inclusive. That means you don't get the UART RX\/TX pins (no console cable) and you don't get the standard user I2C pins, the EEPROM I2C pins, or hardware SPI pins. You do get to use pins #22, #23, #24, #25, #26 and #27, and the USB ports are fine to use too.\u003c\/p\u003e\n\u003cp\u003eThe other catch is that this display replaces the HDMI\/NTSC output, so you can't have the DPI HAT and HDMI working at once, nor can you 'flip' between the two. Also, there's no PWM's available so you can't have precision backlight control unless you somehow rig up an external PWM generator with a 555 or something.\u003c\/p\u003e\n\u003cp\u003eFinally, we did test this setup with a straight-up Raspbian and after the software installs, it works great. However, we don't guarantee it will work with any other Raspberry Pi operating system or setup.\u003c\/p\u003e\n\u003cp\u003eThe Adafruit DPI Kippah for Raspberry Pi (No Touchscreen) lets you connect a 5\" or 7\" TFT directly to your Pi’s GPIO — no HDMI decoder needed! It delivers fast, full-colour 18-bit video with native graphics acceleration and generates its own backlight voltage from the Pi’s 5 V power.\u003c\/p\u003e\n\u003cp\u003eThat said, if you don't need all the Pi GPIO, it's very easy to add a high quality display. Pick and choose whether you want a touch-screen or not, then choose the size of the display - 5\" or 7\" is best. You can also grab an FPC extension board and extend the display away from the Pi. For power-users, this is a very nice little accessory\u003c\/p\u003e\n\u003cp\u003eComes as one fully assembled and tested DPI Kippah circuit board. You may need a soldering iron to adjust the backlight by soldering closed a PCB jumper (check the tutorial on this).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTFT display, USB micro-B cable, FPC extension cable, bent wire stand, and Raspberry Pi not included.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/8QORY5k3244?si=HmAa8TlQfn21OFUR\u0026amp;start=301\" title=\"YouTube video player\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e56mm x 65mm x 5.5mm\u003c\/li\u003e\n\u003cli\u003eWeight: 14.8g\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eResources\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSchematic\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eRevision History\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli style=\"list-style-type: none;\"\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eAs of April 16, 2025 \u003c\/strong\u003eWe added a new backlight controller and updated the PCB with Adafruit Pinguin to make a lovely and legible silkscreen. You may get the new PCB or the older version with vector fonts.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003ePackage Contents\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1x Adafruit DPI TFT Kippah for Raspberry Pi\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Adafruit","offers":[{"title":"Default Title","offer_id":53774835089773,"sku":"jil1787257422807","price":8.17,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0920\/0526\/9869\/files\/adafruit-dpi-tft-kippah-for-raspberry-pi_1.jpg?v=1787257427"},{"product_id":"adafruit-ultimate-gps-hat-for-raspberry-pi-mini-kit","title":"Adafruit Ultimate GPS HAT for Raspberry Pi (Mini Kit)","description":"\u003cp\u003e\u003cem\u003e\u003cstrong\u003eThe Adafruit Ultimate GPS HAT for Raspberry Pi adds precise timekeeping and location tracking to your Pi (compatible with Pi Zero, A+, B+, 2, 3, 4, and 5). It features Adafruit’s trusted GPS module, a coin-cell holder for RTC functionality, GPIO breakouts, and a prototyping area for adding sensors, LEDs, and other components.\u003c\/strong\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003eIt's 10 PM, do you know where your Raspberry Pi is? If you had this GPS HAT, you would! This new HAT from Adafruit adds our celebrated Ultimate GPS, so you can add precision time and location to your Raspberry Pi Model Pi 3, Pi Zero, A+, B+, or Pi 2, 3, 4, \u0026amp; 5.\u003c\/p\u003e\n\u003cp\u003eWe spun up a HAT based on our Ultimate GPS, added a coin-cell holder for RTC usage, break-outs for all the Raspberry Pi's extra pins, and plenty of prototyping area for adding LEDs, sensors, and more.\u003c\/p\u003e\n\u003cp\u003ePlease note, this HAT takes over the Raspberry Pi's hardware UART to send\/receive data to and from the GPS module. \u003cstrong\u003eSo, if you need to use the RX\/TX pins with a console cable, you cannot also use this HAT.\u003c\/strong\u003e Instead, you'll have to use a composite or HDMI monitor and keyboard to log in or use ssh to connect over the network to your Pi. Read up on our tutorial for more information on how to use this fine HAT\u003c\/p\u003e\n\u003cp\u003ePlease note that as of July 2021, the original module we used was discontinued by the vendor. We found and are using a nearly identical version of the module - it's a little taller (4mm) but has the same functionality. The commands for querying the antenna have changed slightly, so existing projects may need to update their software if doing antenna detection.\u003c\/p\u003e\n\u003cp\u003eComes as a fully assembled GPS + PCB and an additional 2x20 GPIO header. Some light soldering is required to attach the 2x20 GPIO header to the HAT, but it's fast and easy for anyone with a soldering iron and solder. You can also swap the plain female header we have with a 'stacky' type that lets you plug in a hat or GPIO cable on top or a slim ultra-low-profile header.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTo make air-shipping easier, this HAT does not come with a 12mm coin battery!\u003c\/strong\u003e A CR1220 will let you use the real-time-clock capability of the GPS HAT, you can pick one up locally or order one from us.\u003c\/p\u003e\n\u003cp\u003e\u003ciframe title=\"YouTube video player\" src=\"https:\/\/www.youtube.com\/embed\/rhpO12-lhmI?si=Ap7efTY-8l6mVfh-\" height=\"315\" width=\"560\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e-165 dBm sensitivity, 10 Hz updates, 99 search channels\u003c\/li\u003e\n\u003cli\u003eGPS + GLONASS support\u003c\/li\u003e\n\u003cli\u003eBuilt-in Real Time Clock (RTC) - slot in a CR1220 backup battery for 7 years or more of timekeeping even if the Raspberry Pi is off!\u003c\/li\u003e\n\u003cli\u003ePPS output on fix, by default connected to pin #4\u003c\/li\u003e\n\u003cli\u003eInternal patch antenna which works quite well when used outdoors + u.FL connector for external active antenna for when used indoors or in locations without a clear sky view\u003c\/li\u003e\n\u003cli\u003eFix status LED blinks to let you know when the GPS has determined the current coordinates\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eDimensions w\/ components: 65mm x 56mm x 7mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eRevision History\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli style=\"list-style-type: none;\"\u003e\n\u003cul\u003e\n\u003cli\u003eAs of Sep 18, 2023\n\u003cul\u003e\n\u003cli\u003eWe have updated this PCB with Adafruit Pinguin to make a lovely and legible silkscreen - you may get the new PCB or the older version with vector fonts - both are identical other than the fancy silkscreen. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eAs of June 21, 2021\n\u003cul\u003e\n\u003cli\u003eThis breakout board now has the PA1616D GPS module. The PA1616D uses IC MT3333 (GPS+GLONASS) instead of the MT3339 (GPS only), so power consumption is higher PA6H, and patch antenna is chunkier from 2.5mm to 4mm.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul id=\"product-files\"\u003e\u003c\/ul\u003e\n\u003cdiv class=\"row\"\u003e\n\u003ch2 class=\"col-lg-2 col-md-3 col-sm-3 col-xs-4\"\u003eResources\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eDatasheets\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003ePackage Contents\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1x Adafruit Ultimate GPS HAT for Raspberry Pi A+\/B+\/Pi 2\/3\/4\/Pi 5 - Mini Kit\u003c\/li\u003e\n\u003cli\u003e1x 20-pin header\n\u003cul\u003e\n\u003cli style=\"font-weight: bold;\"\u003e\u003cstrong\u003eNo coin cell battery included.\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Adafruit","offers":[{"title":"Default Title","offer_id":53774835188077,"sku":"stu1787257424089","price":20.74,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0920\/0526\/9869\/files\/adafruit-ultimate-gps-hat-for-raspberry-pi-mini-kit_1.jpg?v=1787257429"},{"product_id":"adafruit-pi-dish-for-raspberry-pi-includes-breadboard","title":"Adafruit Pi Dish for Raspberry Pi - Includes Breadboard","description":"\u003cp\u003eBy popular demand! We now have a way to attach a Raspberry Pi computer to a plastic 'dish' with a full-sized breadboard!\u003c\/p\u003e\n\u003cp\u003eWe designed it carefully to make it as easy as possible to attach and detach the Pi. There are two ways to mount the Pi onto the plate, so you can flip it around for your convenience. Next to the Pi is a spot for a full-sized breadboard, plenty of space for your project even if you're using an Adafruit Cobbler breakout helper. We also include 4 rubber bumpers to attach to the bottom\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eComes with: \u003c\/strong\u003eLaser cut acrylic plate, mounting screws+nuts for Pi Model A, B rev 2, or B+, four bumpers and a breadboard.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe Pi, cables, wires, and any other components shown for demonstration are not included!\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePlease Note:\u003c\/strong\u003e As of August 7th, 2014 we have updated the Pi Dish to work with Raspberry Pi A, B rev 2, and B+! It no longer includes a board edge mounting kit for Model B rev 1. If you want to use this kit with the Model B rev 1 please pick up a board edge mounting kit. The board edge mounting kit can be purchased here.\u003cbr\u003e\u003c\/p\u003e\n\u003ch2\u003eTechnical Details\u003c\/h2\u003e\n\u003cdiv id=\"tab-technical-details-content\" class=\"panel-collapse collapse in\"\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"col-lg-12 col-md-12 col-sm-12 col-xs-12\"\u003e\n\u003cul\u003e\n\u003cli\u003eDimensions: 182.56mm x 193.7mm x 3.57mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePlease Note:\u003c\/strong\u003e As of August 7th, 2014 we have updated the Pi Dish to work with Raspberry Pi A, B rev 2, and B+! It no longer includes a board edge mounting kit for Model B rev 1. If you want to use this kit with the Model B rev 1 please pick up a board edge mounting kit. The board edge mounting kit can be purchased here.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cul id=\"product-files\"\u003e\u003c\/ul\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"col-lg-2 col-md-3 col-sm-3 col-xs-4\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"col-lg-2 col-md-3 col-sm-3 col-xs-4\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Adafruit","offers":[{"title":"Default Title","offer_id":53774837514605,"sku":"fyd1787257529516","price":11.59,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0920\/0526\/9869\/files\/adafruit-pi-dish-for-raspberry-pi---includes-breadboard_1.jpg?v=1787257534"},{"product_id":"4-40-pin-push-fit-extra-tall-header-set-for-poe-hats","title":"4 + 40 Pin Push-Fit Extra Tall Header Set for PoE HATs","description":"\u003cp\u003e\u003cspan style=\"color: #ff0000;\" data-mce-style=\"color: #ff0000;\"\u003e\u003cstrong\u003ePlease note:\u003c\/strong\u003e\u003c\/span\u003e This set \u003cspan style=\"text-decoration: underline;\" data-mce-style=\"text-decoration: underline;\"\u003e\u003cstrong\u003ewill not work with the newer Raspberry Pi PoE+ HAT\u003c\/strong\u003e\u003c\/span\u003e! The PoE+ HAT does not have a pass-through header for the 4x PoE pins.\u003c\/p\u003e\n\u003cp\u003e\u003cimg alt=\"POE VS POE PLUS\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0176\/3274\/files\/POE-VS-POE-PLUS-ANN.jpg?v=1622799781\u0026amp;width=700\"\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003eStack on top of your \u003cstrong\u003eoriginal\u003c\/strong\u003e Raspberry Pi PoE HAT or Mini PoE HAT with this custom-made extra-tall 2 x 2 pin female header and 2 x 20 pin female header.\u003c\/p\u003e\n\u003cp\u003eThis is a set of two headers that allows you to stack a PoE HAT and another HAT on top of your Raspberry Pi. \u003cstrong\u003eWill not work with the newer PoE+ HAT!\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis is a \u003cstrong\u003epush fit version\u003c\/strong\u003e of our extra tall header designed to match with our Raspberry Pi HAT Socket Headers or directly interface with the 4 pin socket on the original PoE HAT and the 40 pin GPIO header on the Raspberry Pi.\u003c\/p\u003e\n\u003cp\u003eThe pins are extra tall (14.70mm from main body to end of pin), and extra fat (0.65mm x 0.70mm) to ensure a good solid fit with socket headers!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThese headers do not have a shroud\u003c\/strong\u003e, which makes the body of the header 8.50mm tall when placed on a Pi.\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003cbr\u003e\n\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eCompatible with Raspberry Pi 4 and 3B+ only (older models do not have the PoE pins)\u003c\/li\u003e\n\u003cli\u003eTested and compatible with the original PoE HAT\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eNot compatible with the PoE+ (PoE PLUS) HAT\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003eSet of Two\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eGold Plated 4 Pin Double Row (2x2) Socket Connector designed for use with the PoE HAT\u003c\/li\u003e\n\u003cli\u003eGold Plated 40 Pin Double Row (2x20) Socket Connector\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003eExtension for the Raspberry Pi PoE Connectors\u003c\/li\u003e\n\u003cli\u003eDimensions 2x2: (L x W x H): 5.0 x 5.0 x 23.20 mm\u003c\/li\u003e\n\u003cli\u003eDimensions 2x20: (L x W x H): 51.5 x 5.0 x 23.20 mm\u003c\/li\u003e\n\u003cli\u003ePin Dimensions: 0.65 x 0.70mm\u003c\/li\u003e\n\u003cli\u003ePitch 2.54mm\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"The Pi Hut","offers":[{"title":"Default Title","offer_id":53774856454509,"sku":"ldm1787257922545","price":1.86,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0920\/0526\/9869\/files\/4-40-pin-push-fit-extra-tall-header-set-for-poe-hats_1.png?v=1787257927"},{"product_id":"extra-tall-push-fit-stacking-gpio-header-for-raspberry-pi-single-shroud","title":"Extra-Tall Push-Fit Stacking GPIO Header for Raspberry Pi - Single Shroud","description":"\u003cp\u003e\u003cspan\u003eStack multiple HATs \u0026amp; breakouts boards onto your Raspberry Pi with this custom-made\u003c\/span\u003e\u003cstrong\u003e\u003cspan\u003e \u003c\/span\u003eextra-tall\u003c\/strong\u003e\u003cspan\u003e 2 x 20 pin female header with \u003cstrong\u003esingle\u003c\/strong\u003e\u003c\/span\u003e\u003cstrong\u003e shroud\u003c\/strong\u003e\u003cspan\u003e!\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eThis is a \u003cstrong\u003epush fit, single-shroud version\u003c\/strong\u003e of our extra tall header designed to match with our Raspberry Pi HAT Socket Headers. The pins are extra tall (14.70mm from main body to end of pin), and extra fat (0.65mm x 0.70mm) to ensure a good solid fit with socket headers!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe header features a single black shroud\u003c\/strong\u003e, which makes the body of the header 10.60mm tall when placed on a Pi - enough to clear the Ethernet \u0026amp; USB jacks. The black shrouds are not removable on the push-fit version of our extra tall headers. \u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eToo high? Too low? \u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003eWe have a tall version with no shroud to go a little lower, and a version with a double shroud to go even higher!\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eWe've also got a 14mm mounting kit for use with this header.\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eGold Plated 40 Pin Double Row (2x20) Socket Connector\u003c\/li\u003e\n\u003cli\u003eExtension for the Raspberry Pi GPIO Connectors\u003c\/li\u003e\n\u003cli\u003eDimensions (L x W x H): 51.5 x 5.0 x 23.20 mm\u003c\/li\u003e\n\u003cli\u003ePin Dimensions: 0.65 x 0.70mm\u003c\/li\u003e\n\u003cli\u003ePitch 2.54mm\u003c\/li\u003e\n\u003cli\u003eCompatible with any 40-pin Raspberry Pi\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp style=\"margin: 0px 0px 12px; padding: 0px; border: 0px; font-variant-numeric: inherit; font-stretch: inherit; font-size: 14px; line-height: inherit; font-family: 'Roboto Slab', serif; vertical-align: baseline; color: #5d5656;\"\u003e \u003c\/p\u003e","brand":"The Pi Hut","offers":[{"title":"Default Title","offer_id":53774856487277,"sku":"jbw1787257922833","price":1.3,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0920\/0526\/9869\/files\/extra-tall-push-fit-stacking-gpio-header-for-raspberry-pi---single-shroud_1.jpg?v=1787257927"},{"product_id":"52pi-091-128x32-oled-screen-for-raspberry-pi-discontinued","title":"52Pi - 0.91\" 128x32 OLED Screen for Raspberry Pi [Discontinued]","description":"\u003cp\u003eHere's a very cute little 0.91\" Mini OLED Screen from 52Pi! These displays are very tiny, but also very useful! You can use them to display battery status, temperature, mp3 lyrics or anything else! The controller is an SSD1306 IC, and the display can be utilised via i2c or 4-wire SPI.\u003c\/p\u003e\n\n\u003cp\u003e\u003cspan style=\"line-height: 1.6;\"\u003eThe display is made up of 128 x 32 individual yellow and blue OLED pixels, and each one is turned on or off by the on board controller chip via i2c\u003c\/span\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eTechnical Details: \u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eScreen Resolution: 128 × 32 Pixels\u003c\/li\u003e\n\t\u003cli\u003eScreen type: 0.91\"\u003c\/li\u003e\n\t\u003cli\u003eDiplay Size: \u003cspan style=\"line-height: 20.8px;\"\u003e25mm x 10mm\u003c\/span\u003e\n\u003c\/li\u003e\n\t\u003cli\u003eModule Size: \u003cspan style=\"line-height: 20.8px;\"\u003e36mm x 15mm x 12mm\u003c\/span\u003e\n\u003c\/li\u003e\n\t\u003cli\u003ePixel Pitch: 0.17×0.17\u003c\/li\u003e\n\t\u003cli\u003ePixel Size: 0.15×0.15\u003c\/li\u003e\n\t\u003cli\u003eWorking Voltage: 3.3V\u003c\/li\u003e\n\t\u003cli\u003eMax. Working Current: \u0026lt; 100uA\u003c\/li\u003e\n\t\u003cli\u003eMin. Working Current: \u0026gt;12.25uA\u003c\/li\u003e\n\t\u003cli\u003ei2c \u0026amp; SPI Driver Support\u003c\/li\u003e\n\t\u003cli\u003eController IC: SSD1306\u003c\/li\u003e\n\t\u003cli\u003eWide range of operating temperature: -40°C to 85°C\u003c\/li\u003e\n\t\u003cli\u003eOnly use 5 GPIO Pins (3.3V,GND,SDA,SCL,GPIO.7)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003eTutorial\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eOLED Mini Screen Set-Up\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eOLED Mini Screen Product Info.\u003c\/strong\u003e\u003c\/p\u003e","brand":"52Pi","offers":[{"title":"Default Title","offer_id":53774856552813,"sku":"heh1787257925218","price":9.23,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0920\/0526\/9869\/files\/52pi---091-128x32-oled-screen-for-raspberry-pi-discontinued_1.jpg?v=1787257929"},{"product_id":"4-port-usb-hub-phat-for-raspberry-pi-zero","title":"4 Port USB HUB pHAT for Raspberry Pi Zero","description":"\u003cp\u003eThis neat little 4 port USB hub pHAT for the Raspberry Pi \u0026amp; Raspberry Pi Zero\/W, provides 4 extra USB ports for your Pi and features a USB to UART converter for easy serial communication!\u003c\/p\u003e\n\u003cp\u003eThe board comes in a pHAT format and comes complete with micro-USB cable, and Micro USB\/Micro USB shim PCB.\u003c\/p\u003e\n\u003cp\u003e\u003cu\u003e\u003cstrong\u003ePlease check image Point 3 below on how to connect the Hub to your chosen Raspberry Pi version.\u003c\/strong\u003e\u003c\/u\u003e\u003c\/p\u003e\n\u003ch2\u003ePackage Contents\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eUSB HUB HAT\u003c\/li\u003e\n\u003cli\u003eMicro USB connector\u003c\/li\u003e\n\u003cli\u003eMicro USB cable\u003c\/li\u003e\n\u003cli\u003eRPi screws pack (2pcs)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e4 USB Ports, compatible with USB2.0\/1.1\u003c\/li\u003e\n\u003cli\u003eOnboard USB to UART, convenient for Raspberry Pi serial debugging\u003c\/li\u003e\n\u003cli\u003eOnboard multi indicators, for monitoring the status of power, USB to UART, and each USB port\u003c\/li\u003e\n\u003cli\u003eOperating voltage: 5V\u003c\/li\u003e\n\u003cli\u003eDimension: 65mm × 30mm\u003c\/li\u003e\n\u003cli\u003eMounting hole size: 3.0mm\u003c\/li\u003e\n\u003cli\u003eKit Contents: USB Hub pHAT, Micro USB to USB Cable, MicroUSB\/MicroUSB PCB, Mounting Hardware\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhat's Onboard\u003c\/h2\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0176\/3274\/files\/USB-HUB-HAT-intro_480x480.jpg?v=1607942514\" alt=\"\" data-mce-src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0176\/3274\/files\/USB-HUB-HAT-intro.jpg?v=1607942514\u0026amp;width=700\"\u003e\u003c\/p\u003e\n\u003cp\u003e1) Raspberry Pi GPIO interface: for connecting Raspberry Pi\u003cbr\u003e2) USB to UART: for controlling the Raspberry Pi via serial terminal\u003cbr\u003e3) USB HUB interface (Micro USB): for connecting the HUB to the Raspberry Pi USB port\u003cbr\u003e4) Raspberry Pi Zero \/ Zero W: connected via Micro USB to Micro USB PCB\u0026amp;nbsp\u003cbr\u003e6) Raspberry Pi B+ \/ 2B \/ 3B: connected via USB to Micro USB cable\u003cbr\u003e7) USB extended ports: USB1~USB4\u003cbr\u003e8) USB port indicators: dedicated indicator for each USB port, D1~D4 for USB1~USB4 respectively\u003cbr\u003e9) Power indicator\u003cbr\u003e10) USB to UART indicator\u003cbr\u003e11) FE1.1S: USB HUB chip\u003cbr\u003e12) 12MHz crystal\u003cbr\u003e13) CP2102: USB to UART converter\u003c\/p\u003e\n\u003ch2\u003eDevelopment Resources\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eWiki\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Waveshare","offers":[{"title":"Default Title","offer_id":53774856585581,"sku":"zux1787257926658","price":5.83,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0920\/0526\/9869\/files\/4-port-usb-hub-phat-for-raspberry-pi-zero_1.jpg?v=1787257931"},{"product_id":"52pi-096-128x64-oled-screen-for-raspberry-pi-discontinued","title":"52Pi - 0.96\" 128x64 OLED Screen for Raspberry Pi [Discontinued]","description":"\u003cp style=\"line-height: 20.8px;\"\u003eHere's a very cute little 0.96\" Mini OLED Screen from 52Pi! These displays are very tiny, but also very useful! You can use them to display battery status, temperature, mp3 lyrics or anything else! The controller is an SSD1306 IC, and the display can be utilised via i2c or 4-wire SPI.\u003c\/p\u003e\n\n\u003cp style=\"line-height: 20.8px;\"\u003e\u003cspan style=\"line-height: 1.6;\"\u003eThe display is made up of 128 x 64 individual yellow and blue OLED pixels, and each one is turned on or off by the on board controller chip via i2c\u003c\/span\u003e\u003c\/p\u003e\n\n\u003cp style=\"line-height: 20.8px;\"\u003e\u003cstrong\u003eTechnical Details: \u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul style=\"line-height: 20.8px;\"\u003e\n\t\u003cli\u003eScreen Resolution: 128 × 64 Pixels\u003c\/li\u003e\n\t\u003cli\u003eScreen type: 0.96\"\u003c\/li\u003e\n\t\u003cli\u003eDiplay Size: 25mm x 20mm\u003c\/li\u003e\n\t\u003cli\u003eModule Size: 36mm x 30mm x 12mm\u003c\/li\u003e\n\t\u003cli\u003ePixel Pitch: 0.17×0.17\u003c\/li\u003e\n\t\u003cli\u003ePixel Size: 0.15×0.15\u003c\/li\u003e\n\t\u003cli\u003eWorking Voltage: 3.3V\u003c\/li\u003e\n\t\u003cli\u003eMax. Working Current: \u0026lt; 100uA\u003c\/li\u003e\n\t\u003cli\u003eMin. Working Current: \u0026gt;12.25uA\u003c\/li\u003e\n\t\u003cli\u003ei2c \u0026amp; SPI Driver Support\u003c\/li\u003e\n\t\u003cli\u003eController IC: SSD1306\u003c\/li\u003e\n\t\u003cli\u003eWide range of operating temperature: -40°C to 85°C\u003c\/li\u003e\n\t\u003cli\u003eOnly use 5 GPIO Pins (3.3V,GND,SDA,SCL,GPIO.7)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp style=\"line-height: 20.8px;\"\u003e\u003cstrong\u003eTutorial\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp style=\"line-height: 20.8px;\"\u003e\u003cstrong\u003eOLED Mini Screen Set-Up\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp style=\"line-height: 20.8px;\"\u003e\u003cstrong\u003eOLED Mini Screen Product Info.\u003c\/strong\u003e\u003c\/p\u003e","brand":"52Pi","offers":[{"title":"Default Title","offer_id":53774856618349,"sku":"iqb1787257927273","price":9.74,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0920\/0526\/9869\/files\/52pi---096-128x64-oled-screen-for-raspberry-pi-discontinued_1.jpg?v=1787257932"},{"product_id":"allo-boss-raspberry-pi-master-dac-v12-discontinued","title":"Allo BOSS - Raspberry Pi Master DAC v1.2 [discontinued]","description":"\u003cp\u003eThe Raspberry Pi has one major problem with audio - The clocks coming from CPU can only output one frequency clock perfectly, resulting in problems such as jitter with audio files sampled at 44Khz.\u003c\/p\u003e\n\u003cp\u003eSo what's the solution? Enter the master mode for i2s. Instead of the Raspberry Pi giving the clock on the line, the BOSS DAC itself sends the clocks and the Raspberry Pi sends the data!\u003c\/p\u003e\n\u003cp\u003eOur BOSS DAC is unique; First we separate the power on 3 channels and filter it: one for the digital side, the second for analog and third for the clocks themselves. Then we take the filtered power and use a second filter (LDOs) to further quiet the noise. Note that we use some of the best LDOs on the market (LT3042 from Linear). In addition, we use Japanese oscillators from NDK for a very low jitter clock - almost as good as famous Crystek.\u003c\/p\u003e\n\u003cp\u003eFinally, on the analog stage the BOSS DAC uses a film capacitor (not ceramic) for a quiet DC to feed the TI IC (ceramic exhibits some piezo distortion, not what you want in analog stage). Not happy with this, we have added a supercapacitor for an extra kick when analog stage is asking (like deep bass).\u003c\/p\u003e\n\u003cp\u003eWhat we have achieved, in our opinion, is the best analog implementation of the PCM5122 on the market, while at same time correcting the clock problem from RPI.\u003c\/p\u003e\n\u003cp\u003eThe BOSS DAC is a very solid implementation of the PCM IC that will give you the greatest bang for your buck. It will sound great no matter what you throw at it - this was our goal and promise to you.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBOSS is a Master DAC (Master DACs are compatible only with RPI)\u003c\/li\u003e\n\u003cli\u003eCompatible with Raspberry Pi 4 and 3\u003c\/li\u003e\n\u003cli\u003eDedicated 384 kHz\/32bit high-quality DAC PCM5122 for best sound quality\u003c\/li\u003e\n\u003cli\u003eAudio output connectors: 2 x RCA (Left \u0026amp; Right ) \u0026amp; Allo Volt Amp header\u003c\/li\u003e\n\u003cli\u003eHAT size\u003c\/li\u003e\n\u003cli\u003eDAC SNR is 112dB\u003c\/li\u003e\n\u003cli\u003eDAC THD+N @ -1dBFS are –87dB\u003c\/li\u003e\n\u003cli\u003eFull Scale Output of DAC is 2.1Vrms\u003c\/li\u003e\n\u003cli\u003eDynamic Range of DAC is 112dB\u003c\/li\u003e\n\u003cli\u003eSampling Frequency ranges from 8 kHz to 384 kHz\u003c\/li\u003e\n\u003cli\u003eUltra-low-noise voltage regulators \u0026amp; LPF for optimal audio performance\u003c\/li\u003e\n\u003cli\u003eNoise level: 66.27uVrms\u003c\/li\u003e\n\u003cli\u003eIntegrated EEPROM for automatic configuration (with write-protection)\u003c\/li\u003e\n\u003cli\u003eAutomatically switching frequencies according to the input I2S signals\u003c\/li\u003e\n\u003cli\u003eDual low jitter NDK crystal oscillators for Master Clock generation\u003c\/li\u003e\n\u003cli\u003eWith 45.1584\/49.1520 MHz Ultra Low Phase Noise Oscillators\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eDownloads\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eBOSS DAC Support \u0026amp; Download Page\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eTechnical Specification Page\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Allo","offers":[{"title":"Default Title","offer_id":53774856683885,"sku":"nng1787257928571","price":46.2,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0920\/0526\/9869\/files\/allo-boss---raspberry-pi-master-dac-v12-discontinued_1.jpg?v=1787257933"},{"product_id":"allo-digione-signature-spdif-output-discontinued","title":"Allo DigiOne Signature - S\/PDIF Output [Discontinued]","description":"\u003cp\u003e\u003cb\u003e\u003c\/b\u003eOur regular DigiOne has no equal.\u003c\/p\u003e\n\u003cp\u003eIn our quest for digital perfection, we asked how we can improve the design and give you the ultimate DigiOne.\u003c\/p\u003e\n\u003cp\u003eFirst, we decided to use more board space (we are using 2 boards), the PCB area increased 220%. First board is the “dirty side” and top board has the “clean side”. With the extra space, we used the best decoupling capacitors (film) on everything that’s important (clocks, buffers, flip flops). Also, with this extra space we added a supercap on the “clean side” so most of the electrons come from this onboard “buffer” (there is so much power onboard that DigiOne Sig can run a few seconds without any power attached to the clean side).\u003c\/p\u003e\n\u003cp\u003eWe also decided to use 2 power supplies. The “dirty power” needs 5V \/2-3A (RPI power). The “clean side” needs about 100mA and accepts from 5V to 6V. You can use anything on it, linear power supply or pure batteries power.\u003c\/p\u003e\n\u003cp\u003eThirdly, we changed the clocks to the latest from NDK (ultralow jitter SDA) that have lower phase noise than the previous generation.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003ePlease Note.\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003eThe Digione Signature needs 2 PSU's to run.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eYou can purchase 1 x 5V 3A PSU to feed the dirty side.\u003c\/p\u003e\n\u003cp\u003eWe strongly recommend you purchase the battery pack or use a very good power supply for the clean side. You can use an additional 5V 3A PSU to feed the clean side, although a battery pack is the recommended set up.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCompatibility\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Digione has a galvanic isolator for both power and signals. \u003cstrong\u003eYou do not need an extra isolator. \u003c\/strong\u003eAdditionally, DigiOne has a double relocking of the S\/PDIF stream (one of them taking care of metastability and the second one taking care of realigning the data). \u003cstrong\u003eYou do not need another reclocker (like Kali)\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eIt’s a \"re-clocker\". The unit has its own clocks so it does not rely on the jittery RPI clocks\u003c\/li\u003e\n\u003cli\u003eIt's galvanically isolated. The clean board is isolated (ground and signals) from the dirty side\u003c\/li\u003e\n\u003cli\u003eIt needs 2 PSUs, one for 5V\/2A-3A (RPI) and a second power 5V to 6V 100mA. We do recommend the cleanest power supply possible (batteries, linear but even a good SMPS will work)\u003c\/li\u003e\n\u003cli\u003eOld driver is compatible for both units (chose DigiOne on your favorite player)\u003c\/li\u003e\n\u003cli\u003eMeasured jitter has decreased further, less than 400fs (tested at buffer)\u003c\/li\u003e\n\u003cli\u003eOutput is coaxial\/BNC and rise\/fall time is 1ns and voltage level is exactly as per guidelines (550mV on coaxial) measured at end of transmitting cables\u003c\/li\u003e\n\u003cli\u003eIncludes 2 x DC to USB-C Adapter Cables\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Allo","offers":[{"title":"Default Title","offer_id":53774856913261,"sku":"efp1787257930000","price":141.75,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0920\/0526\/9869\/files\/allo-digione-signature---spdif-output-discontinued_1.jpg?v=1787257934"},{"product_id":"allo-relay-attenuator-10k-stereo-discontinued","title":"Allo Relay Attenuator - 10k Stereo [Discontinued]","description":"\u003cp\u003eRelay Attenuator (RA) is a hardware volume control. It takes input from DAC shields and attenuates the output by relay switching. This is Allo's Relay Attenuator, designed to be used with the Piano 2.1 \u0026amp; Boss DACs! \u003c\/p\u003e\n\u003cp\u003eThe Relay Attenuator has been designed for Audio attenuation after Piano DAC output, and features a 1dB step size. It's a compact circuit, featuring just 6 tiny relays, implementing a 64-step logarithmic stereo attenuation.The 64 steps of 1.0dB span a 63dB audio attenuation range. By avoiding any active electronics, relay attenuation results in a very clean and open sound.\u003c\/p\u003e\n\u003cp\u003eSimply plug in above your DAC and then take the output attenuated by relays switching, to thin film 0.1% 25ppm SUSUMU audio grade resistors.\u003c\/p\u003e\n\u003cp\u003eThe nominal value is 10k.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eConstant Input resistor:10K\u003c\/li\u003e\n\u003cli\u003eLoad resistance: 60K\u003c\/li\u003e\n\u003cli\u003eResistance standard:E192\u003c\/li\u003e\n\u003cli\u003eStep Size :1dB\u003c\/li\u003e\n\u003cli\u003eNo.of relays:6\u003c\/li\u003e\n\u003cli\u003eNo.of Steps:64dB\u003c\/li\u003e\n\u003cli\u003eInput audio connectivity: Stereo inputs through on-board RCA Connectors.\n\u003cul\u003e\n\u003cli\u003eLeft Out: white RCA connector.\u003c\/li\u003e\n\u003cli\u003eRight Out: Red RCA connector.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eOutput audio connectivity: Stereo outputs through on-board RCA Connectors.\n\u003cul\u003e\n\u003cli\u003eLeft Input: white RCA connector.\u003c\/li\u003e\n\u003cli\u003eRight Input: Red RCA connector.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003ePCB Dimension: 85x67.8x22.2mm (W*L*H)\u003c\/li\u003e\n\u003cli\u003eWeight: 42gm.\u003c\/li\u003e\n\u003cli\u003eOperating Temperature: 0 o C to 70oC\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eDownloads\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRelay Attenuator User Manual\u003c\/li\u003e\n\u003cli\u003eRelay Attenuator Tech Manual\u003c\/li\u003e\n\u003cli\u003eConfiguring Allo Audio Cards for Raspberry Pi\u003c\/li\u003e\n\u003cli\u003eHow To Use The Relay Attenuator With Volumio\u003c\/li\u003e\n\u003cli\u003eRelay Attenuator Measurements and Graph\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Allo","offers":[{"title":"Default Title","offer_id":53774856978797,"sku":"fhw1787257930944","price":35.36,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0920\/0526\/9869\/files\/allo-relay-attenuator---10k-stereo-discontinued_1.jpg?v=1787257935"},{"product_id":"52pi-hat-triple-gpio-expansion-plate-discontinued","title":"52Pi - HAT \u0026 Triple GPIO Expansion Plate [Discontinued]","description":"\u003cp\u003eThis triple GPIO \u0026amp; HAT expansion plate from 52Pi is perfect for sharing GPIO pins between applications and circuits! It's often fiddly to combine HATs and breakout boards onto the standard single Pi GPIO header, but with the expansion plate, it's a breeze. Simply hook up your Pi to the plate using a ribbon cable, plug your HAT onto the HAT station and plug any additional circuits or breakout boards into additional headers! You can even use the board to design your own HAT!\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eThis board does require some solder assembly to connect the headers to the board.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003e52Pi - HAT \u0026amp; Triple GPIO Expansion Plate Features:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eTriple GPIO Header Replicator\u003c\/li\u003e\n\t\u003cli\u003eExternal HAT Station\u003c\/li\u003e\n\t\u003cli\u003eIncludes:\n\t\u003cul\u003e\n\t\t\u003cli\u003eExpansion Plate\u003c\/li\u003e\n\t\t\u003cli\u003eRibbon Cable\u003c\/li\u003e\n\t\t\u003cli\u003e4 x 40 Pin Headers\u003c\/li\u003e\n\t\t\u003cli\u003eHAT Mounting Kit\u003c\/li\u003e\n\t\u003c\/ul\u003e\n\t\u003c\/li\u003e\n\u003c\/ul\u003e\n","brand":"52Pi","offers":[{"title":"Default Title","offer_id":53774857011565,"sku":"pbx1787257933621","price":6.21,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0920\/0526\/9869\/files\/52pi---hat-triple-gpio-expansion-plate-discontinued_1.jpg?v=1787257938"},{"product_id":"allo-kali-i2s-reclocker-discontinued","title":"Allo Kali - i2s Reclocker [Discontinued]","description":"\u003cp\u003e\u003cstrong\u003eKali The Goddess of Time\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eEvery SBC has a crystal that it used to send digital signals to your DACs. The accuracy of this crystal is very important in how well the DAC will transform the digital signal into analog sounds. Simply put: a better crystal means a better sound! Most SBCs use a very cheap crystal with lots of jitter in order to save costs.\u003c\/p\u003e\n\u003cp\u003eFurthermore, there are 2 kinds of frequencies for digital files: 44.1Khz (wave files) and 48khz (streamed music). Some SBCs (like RPIs) can output only 48Khz, so imagine the degradation of the sound that was recorded at a different frequency.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKali will solve both of those problems\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFirst, it has a very low jitter NDK crystal feed by LDOs in series for ultra quiet power supply. Second, the FPGA will read the incoming stream, will buffer the DATA 0.7s while discarding the incoming clocks. Using the NDKs it will reclock the buffered data OUTSIDE the fpga (since fpgas introduce about 200ps of jitter) and provide a MCLK\/BCLK that is direct from crystal, providing a jitter-free (almost) to your DAC.\u003c\/p\u003e\n\u003cp\u003eMeanwhile, it will clock the file using the correct crystal (there are 2), fixing the problems outlined in the beginning.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWorks great with Piano\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eKali will not work if your DAC is a master. Dac has to be slave. We highly recommend our Piano 2.1 - they were designed to work perfectly together!\u003c\/p\u003e\n\u003cp\u003eThe million dollar question, how does it sound? Well, the music will \"open up\". The stage will sound bigger, more tri-dimensional. You will hear sounds, words, instruments that were drowned before in a sea of digital mud.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it worth it?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eDo you enjoy a better wine\/microbrewery beer, or anything will do? Do you have some medium\/good speakers or you are using the cheapest PC speakers? Do you love music or just want to hear some beats? We can’t answer the question for you. It’s your choice.\u003c\/p\u003e\n\u003cp\u003eKali needs to be powered from \u003cu\u003e5V 3A DC Barrel Jack, and cannot be powered from SBC\u003c\/u\u003e. Kali will power SBC + DAC.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eKali is compatible with Sparky and Raspberry Pi\u003c\/li\u003e\n\u003cli\u003eReduces jitter to less than 4 pico seconds\u003c\/li\u003e\n\u003cli\u003eThe basic design includes FPGA based FIFO board\u003c\/li\u003e\n\u003cli\u003eWith 45.1584\/49.1520 MHz Ultra Low Phase Noise Oscillators\u003c\/li\u003e\n\u003cli\u003eI2S input: 44.1 KHz, 48 KHz, 88.2 KHz, 96 KHz, 176.4 KHz, 192 KHz , 352.8KHz,384KHz- 16bit, 24bit or 32bit\u003c\/li\u003e\n\u003cli\u003eI2S output: 44.1 KHz, 48 KHz, 88.2 KHz, 96 KHz, 176.4 KHz, 192 KHz , 352.8KHz,384KHz - 16bit, 24bit or 32bit\u003c\/li\u003e\n\u003cli\u003eFIFO Memory: 4MB SRAM\u003c\/li\u003e\n\u003cli\u003eLED indicators (Power, Full, Lock, Empty, Sample Rate, Mclk)\u003c\/li\u003e\n\u003cli\u003eDC power supply: (5V\/3A) with Filter circuits. 5.5\/2.1mm (Not Included)\u003c\/li\u003e\n\u003cli\u003eMulti-frequency output capability to support the full I2S working range from 44.1 KHz to 384 KHz\u003c\/li\u003e\n\u003cli\u003eAutomatically switching frequencies according to the input I2S signals\u003c\/li\u003e\n\u003cli\u003eExtremely fast and very low propagation delay Flip-Flops are added on I2s signals output from FPGA, for synchronization with MCLK before sending to DAC\u003c\/li\u003e\n\u003cli\u003eUltra-low-noise voltage regulators for optimal audio performance\u003c\/li\u003e\n\u003cli\u003eIntegrated EEPROM for automatic configuration (with write-protection)\u003c\/li\u003e\n\u003cli\u003ePurchase stand-alone Kali unit or get the Vana Player bundle (Sparky + Kali + Piano 2.1 + Volt + CM + 5V Adaptor + Acrylic Box)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eCompatibility\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eCompatibility: Sparky and RPI. Compatible ONLY with Slave DACs. Compatible with Isolator hat.\u003c\/p\u003e\n\u003cp\u003eDoes \u003cstrong\u003e\u003cu\u003eNOT\u003c\/u\u003e \u003c\/strong\u003ework with Master DACs (like our BOSS)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDownloads\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eDownload Product Brochure\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eKali I2S Pinout to DAC Boards\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eKali I2S Pinout From SBC\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eKali Jumper Settings\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eKali Tech Manual\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eVana Tech Manual\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eConfiguring Allo Audio Cards for Raspberry Pi\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eDC Jack Connector Inner \/ Outer Dimensions\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eImages, Drivers \u0026amp; Resources\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Allo","offers":[{"title":"Default Title","offer_id":53774857077101,"sku":"mon1787257935799","price":42.6,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0920\/0526\/9869\/files\/allo-kali---i2s-reclocker-discontinued_1.jpg?v=1787257941"},{"product_id":"allo-digione-spdif-output-discontinued","title":"Allo DigiOne - S\/PDIF Output [Discontinued]","description":"\u003cp\u003eAllo have designed a digital (S\/PDIF) transport for Raspberry Pi audio with one goal in mind: Absolut best S\/PDIF output.\u003c\/p\u003e\n\n\u003cp\u003eBasically, you have your music on the cloud or on your PC\/NAS. If it’s on the cloud , you will use your smartphone to access your account and play. From your smartphone, in order to send the music to your DAC (DACs have USB and\/or S\/PDIF inputs) you need a transport that will be visible (to your smartphone \/ tablet \/PC) as an Airplay device (iOS ) or UPNP\/DLNA (Android\/PC). Our transports have different outputs. USBridge feeds your DAC through USB, and DigiOne uses coaxial\/bnc. Depending on your DAC inputs you need to make a choice.\u003c\/p\u003e\n\n\u003cp\u003eSince this is a digital stream the most important aspect for \"absolut best\" is jitter. Jitter in digital domain directly translates into analog errors. Second, is noise. Lowering the noise that’s injected in your DAC will produce some (small-to-none) improvements.\u003c\/p\u003e\n\n\u003cp\u003e10 LDOs, 12 LPF, DC\/DC convertors, galvanic isolator, WM8805, flip flops, buffers, NDK oscillators. Optical had to go… by definition it has a jitter of 4ns. That’s 4000ps. We simply removed it. However, optical has galvanic isolation so we took the decision to use a digital isolator instead that separates the outputs from both RPI and WM8805.\u003c\/p\u003e\n\n\u003cp\u003eDigiOne has 2 outputs: BNC and plain RCA (coaxial). On both, we have achieved jitter of 0.6ps (1 picosecond – time taken by light in a vacuum to travel approximately 0.30 mm).\u003c\/p\u003e\n\n\u003cp\u003eNoise. 50uV (batteries have about 12uV of noise).\u003c\/p\u003e\n\n\u003cp\u003eWhat we achieved, in our opinion and based on public measurements, is the best transport at any price point (yes, even when compared with 5k USD\/EUR transports).\u003c\/p\u003e\n\n\u003cp\u003eEnjoy.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eCompatibility\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThe Digione has a galvanic isolator for both power and signals. \u003cstrong\u003eYou do not need an extra isolator. \u003c\/strong\u003eAdditionally, DigiOne has a double relocking of the S\/PDIF stream (one of them taking care of metastability and the second one taking care of realigning the data). \u003cstrong\u003eYou do not need another reclocker (like Kali)\u003c\/strong\u003e.\u003c\/p\u003e\n\n\u003cp\u003ePSU: Not needed (power is taken from RPI, then we use a isolated DC\/DC convertor with filters and LDO)\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003e10 LDOs, 12 LPF, DC\/DC convertors, galvanic isolator, WM8805, flip flops, buffers, NDK oscillators.\u003c\/li\u003e\n\t\u003cli\u003e2 outputs: BNC and plain RCA (coaxial)\u003c\/li\u003e\n\t\u003cli\u003eNoise. 50uV\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003eDownloads\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003e\u003cstrong\u003eDigiOne + DietPi Installation and Configuration Guide\u003c\/strong\u003e\u003c\/li\u003e\n\t\u003cli\u003e\u003cstrong\u003eDigiOne + Volumio Installation and Configuration Guide\u003c\/strong\u003e\u003c\/li\u003e\n\t\u003cli\u003e\u003cstrong\u003eTechnical Details for DigiOne\u003c\/strong\u003e\u003c\/li\u003e\n\t\u003cli\u003e\u003cstrong\u003eDigiOne Header PIN Out Details\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n","brand":"Allo","offers":[{"title":"Default Title","offer_id":53774857142637,"sku":"nek1787257937317","price":64.4,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0920\/0526\/9869\/files\/allo-digione---spdif-output-discontinued_1.jpg?v=1787257942"},{"product_id":"tall-push-fit-stacking-gpio-header-for-raspberry-pi-no-shroud","title":"Tall Push-Fit Stacking GPIO Header for Raspberry Pi - No Shroud","description":"\u003cp\u003eStack multiple HATs \u0026amp; breakouts boards onto your Raspberry Pi with this custom-made \u003cstrong\u003etall\u003c\/strong\u003e 2 x 20 pin female header with \u003cstrong\u003eno shroud\u003c\/strong\u003e!\u003c\/p\u003e\n\u003cp\u003eThis is a \u003cstrong\u003epush fit, no shroud version\u003c\/strong\u003e of our Tall GPIO Header designed to be used with pass-through headers on HATs, such as those found on the Fan Shim. They also match with our Raspberry Pi HAT Socket Headers if you're making your own PCB\/HAT.\u003c\/p\u003e\n\u003cp\u003eThe pins are extra tall (14.70mm from main body to end of pin), and extra fat (0.65mm x 0.70mm) to ensure a good solid fit with socket headers!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe header features no black spacer\/shroud\u003c\/strong\u003e, which makes the body of the header 8.50mm tall when placed on a Pi.\u003c\/p\u003e\n\u003cp\u003eNeed to go higher? We have extra-tall versions with either single shroud or double shroud for an even taller setup.\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eGold Plated 40 Pin Double Row (2x20) Socket Connector\u003c\/li\u003e\n\u003cli\u003eExtension for the Raspberry Pi GPIO Connectors\u003c\/li\u003e\n\u003cli\u003eDimensions (L x W x H): 51.5 x 5.0 x 23.20 mm\u003c\/li\u003e\n\u003cli\u003ePin Dimensions: 0.65 x 0.70mm\u003c\/li\u003e\n\u003cli\u003ePitch 2.54mm\u003c\/li\u003e\n\u003cli\u003eCompatible with any 40-pin Raspberry Pi\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"The Pi Hut","offers":[{"title":"Default Title","offer_id":53774857175405,"sku":"hml1787257937860","price":1.2,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0920\/0526\/9869\/files\/tall-push-fit-stacking-gpio-header-for-raspberry-pi---no-shroud_1.jpg?v=1787257943"},{"product_id":"allo-mini-boss-phat-pi-zero-master-dac-discontinued","title":"Allo Mini BOSS pHAT - Pi Zero \"Master\" DAC [discontinued]","description":"\u003cp\u003eThere are many DACs for Raspberry Pi Zero. Most of them low-priced, carbon copy of datasheet, slave DACs.\u003c\/p\u003e\n\u003cp\u003eAllo decided to do something different. . . . introducing the first \u003cstrong\u003eMaster DAC\u003c\/strong\u003e for the Pi Zero, based on PCM5122 with many improvements over the standard circuit!\u003c\/p\u003e\n\u003cp\u003eThe Raspberry Pi has one major problem with audio - The clocks coming from CPU can only output one frequency clock perfectly, resulting in problems such as jitter with audio files sampled at 44Khz.\u003c\/p\u003e\n\u003cp\u003eSo what's the solution? Enter the master mode for i2s. Instead of the Raspberry Pi giving the clock on the line, the Mini BOSS DAC itself sends the clocks and the Raspberry Pi sends the data!\u003c\/p\u003e\n\u003cp\u003eOur Mini BOSS DAC is unique; First we separate the power on 3 channels and filter it: one for the digital side, the second for analog and third for the clocks themselves. Then we take the filtered power and use a second filter (LDOs) to further quiet the noise. Note that we use some of the best LDOs on the market (LT3042 from Linear). In addition, we use Japanese oscillators from NDK for a very low jitter clock - almost as good as famous Crystek.\u003c\/p\u003e\n\u003cp\u003eFinally, on the analog stage the Mini BOSS DAC uses a film capacitor (not ceramic) for a quiet DC to feed the TI IC (ceramic exhibits some piezo distortion, not what you want in analog stage). Not happy with this, we have added a supercapacitor for an extra kick when analog stage is asking (like deep bass).\u003c\/p\u003e\n\u003cp\u003eWhat we have achieved, in our opinion, is the best analog implementation of the PCM5122 on the market, while at same time correcting the clock problem from RPI.\u003c\/p\u003e\n\u003cp\u003eThe Mini BOSS DAC is a very solid implementation of the PCM IC that will give you the greatest bang for your buck. It will sound great no matter what you throw at it - this was our goal and promise to you.\u003c\/p\u003e\n\u003cp style=\"margin: 0px 0px 12px; padding: 0px; border: 0px; font-variant-numeric: inherit; font-stretch: inherit; font-size: 14px; line-height: inherit; font-family: 'Roboto Slab', serif; vertical-align: baseline; color: #5d5656;\"\u003e\u003cspan style=\"margin: 0px; padding: 0px; border: 0px; font-style: inherit; font-variant: inherit; font-weight: bold; font-stretch: inherit; font-size: inherit; line-height: inherit; font-family: inherit; vertical-align: baseline;\"\u003eFeatures\u003c\/span\u003e\u003c\/p\u003e\n\u003cul style=\"margin: 0px 0px 20px 20px; padding-right: 0px; padding-left: 20px; border: 0px; font-variant-numeric: inherit; font-stretch: inherit; font-size: 14px; line-height: inherit; font-family: 'Roboto Slab', serif; vertical-align: baseline; list-style-position: outside; list-style-image: initial; color: #5d5656;\"\u003e\n\u003cli style=\"margin: 0px 0px 5px; padding: 0px; border: 0px; font-style: inherit; font-variant: inherit; font-weight: inherit; font-stretch: inherit; font-size: inherit; line-height: inherit; font-family: inherit; vertical-align: baseline;\"\u003eMini BOSS is a Master DAC (Master DACs are compatible only with Raspberry Pi Zero \u0026amp; Zero W)\u003c\/li\u003e\n\u003cli style=\"margin: 0px 0px 5px; padding: 0px; border: 0px; font-style: inherit; font-variant: inherit; font-weight: inherit; font-stretch: inherit; font-size: inherit; line-height: inherit; font-family: inherit; vertical-align: baseline;\"\u003eCompatible with RPi Zero \u0026amp; Zero W\u003c\/li\u003e\n\u003cli style=\"margin: 0px 0px 5px; padding: 0px; border: 0px; font-style: inherit; font-variant: inherit; font-weight: inherit; font-stretch: inherit; font-size: inherit; line-height: inherit; font-family: inherit; vertical-align: baseline;\"\u003eDedicated 384 kHz\/32bit high-quality DAC PCM5122 for best sound quality\u003c\/li\u003e\n\u003cli style=\"margin: 0px 0px 5px; padding: 0px; border: 0px; font-style: inherit; font-variant: inherit; font-weight: inherit; font-stretch: inherit; font-size: inherit; line-height: inherit; font-family: inherit; vertical-align: baseline;\"\u003eAudio output connectors: 2 x RCA (Left \u0026amp; Right )\u003c\/li\u003e\n\u003cli style=\"margin: 0px 0px 5px; padding: 0px; border: 0px; font-style: inherit; font-variant: inherit; font-weight: inherit; font-stretch: inherit; font-size: inherit; line-height: inherit; font-family: inherit; vertical-align: baseline;\"\u003epHAT size\u003c\/li\u003e\n\u003cli style=\"margin: 0px 0px 5px; padding: 0px; border: 0px; font-style: inherit; font-variant: inherit; font-weight: inherit; font-stretch: inherit; font-size: inherit; line-height: inherit; font-family: inherit; vertical-align: baseline;\"\u003eDAC SNR is 112dB\u003c\/li\u003e\n\u003cli style=\"margin: 0px 0px 5px; padding: 0px; border: 0px; font-style: inherit; font-variant: inherit; font-weight: inherit; font-stretch: inherit; font-size: inherit; line-height: inherit; font-family: inherit; vertical-align: baseline;\"\u003eDAC THD+N @ -1dBFS are –87dB\u003c\/li\u003e\n\u003cli style=\"margin: 0px 0px 5px; padding: 0px; border: 0px; font-style: inherit; font-variant: inherit; font-weight: inherit; font-stretch: inherit; font-size: inherit; line-height: inherit; font-family: inherit; vertical-align: baseline;\"\u003eFull Scale Output of DAC is 2.1Vrms\u003c\/li\u003e\n\u003cli style=\"margin: 0px 0px 5px; padding: 0px; border: 0px; font-style: inherit; font-variant: inherit; font-weight: inherit; font-stretch: inherit; font-size: inherit; line-height: inherit; font-family: inherit; vertical-align: baseline;\"\u003eDynamic Range of DAC is 112dB\u003c\/li\u003e\n\u003cli style=\"margin: 0px 0px 5px; padding: 0px; border: 0px; font-style: inherit; font-variant: inherit; font-weight: inherit; font-stretch: inherit; font-size: inherit; line-height: inherit; font-family: inherit; vertical-align: baseline;\"\u003eSampling Frequency ranges from 8 kHz to 384 kHz\u003c\/li\u003e\n\u003cli style=\"margin: 0px 0px 5px; padding: 0px; border: 0px; font-style: inherit; font-variant: inherit; font-weight: inherit; font-stretch: inherit; font-size: inherit; line-height: inherit; font-family: inherit; vertical-align: baseline;\"\u003eUltra-low-noise voltage regulators \u0026amp; LPF for optimal audio performance\u003c\/li\u003e\n\u003cli style=\"margin: 0px 0px 5px; padding: 0px; border: 0px; font-style: inherit; font-variant: inherit; font-weight: inherit; font-stretch: inherit; font-size: inherit; line-height: inherit; font-family: inherit; vertical-align: baseline;\"\u003eNoise level: 66.27uVrms\u003c\/li\u003e\n\u003cli style=\"margin: 0px 0px 5px; padding: 0px; border: 0px; font-style: inherit; font-variant: inherit; font-weight: inherit; font-stretch: inherit; font-size: inherit; line-height: inherit; font-family: inherit; vertical-align: baseline;\"\u003eIntegrated EEPROM for automatic configuration (with write-protection)\u003c\/li\u003e\n\u003cli style=\"margin: 0px 0px 5px; padding: 0px; border: 0px; font-style: inherit; font-variant: inherit; font-weight: inherit; font-stretch: inherit; font-size: inherit; line-height: inherit; font-family: inherit; vertical-align: baseline;\"\u003eAutomatically switching frequencies according to the input I2S signals\u003c\/li\u003e\n\u003cli style=\"margin: 0px 0px 5px; padding: 0px; border: 0px; font-style: inherit; font-variant: inherit; font-weight: inherit; font-stretch: inherit; font-size: inherit; line-height: inherit; font-family: inherit; vertical-align: baseline;\"\u003eDual low jitter NDK crystal oscillators for Master Clock generation\u003c\/li\u003e\n\u003cli style=\"margin: 0px 0px 5px; padding: 0px; border: 0px; font-style: inherit; font-variant: inherit; font-weight: inherit; font-stretch: inherit; font-size: inherit; line-height: inherit; font-family: inherit; vertical-align: baseline;\"\u003eWith 45.1584\/49.1520 MHz Ultra Low Phase Noise Oscillators\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp style=\"margin: 0px 0px 12px; padding: 0px; border: 0px; font-variant-numeric: inherit; font-stretch: inherit; font-size: 14px; line-height: inherit; font-family: 'Roboto Slab', serif; vertical-align: baseline; color: #5d5656;\"\u003e\u003cspan style=\"margin: 0px; padding: 0px; border: 0px; font-style: inherit; font-variant: inherit; font-weight: bold; font-stretch: inherit; font-size: inherit; line-height: inherit; font-family: inherit; vertical-align: baseline;\"\u003eDownloads\u003c\/span\u003e\u003c\/p\u003e\n\u003cul style=\"margin: 0px 0px 20px 20px; padding-right: 0px; padding-left: 20px; border: 0px; font-variant-numeric: inherit; font-stretch: inherit; font-size: 14px; line-height: inherit; font-family: 'Roboto Slab', serif; vertical-align: baseline; list-style-position: outside; list-style-image: initial; color: #5d5656;\"\u003e\n\u003cli style=\"margin: 0px 0px 5px; padding: 0px; border: 0px; font-style: inherit; font-variant: inherit; font-weight: inherit; font-stretch: inherit; font-size: inherit; line-height: inherit; font-family: inherit; vertical-align: baseline;\"\u003e\u003cspan style=\"font-size: inherit;\"\u003e\u003cspan style=\"margin: 0px; padding: 0px; border: 0px; font-style: inherit; font-variant: inherit; font-weight: bold; font-stretch: inherit; line-height: inherit; font-family: inherit; vertical-align: baseline; color: #c51f51; text-decoration-line: none;\"\u003eBOSS DAC Support \u0026amp; Download Page\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"margin: 0px 0px 5px; padding: 0px; border: 0px; font-style: inherit; font-variant: inherit; font-weight: inherit; font-stretch: inherit; font-size: inherit; line-height: inherit; font-family: inherit; vertical-align: baseline;\"\u003e\u003cspan style=\"margin: 0px; padding: 0px; border: 0px; font-style: inherit; font-variant: inherit; font-weight: bold; font-stretch: inherit; font-size: inherit; line-height: inherit; font-family: inherit; vertical-align: baseline;\"\u003eTechnical Specification Page\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Allo","offers":[{"title":"Default Title","offer_id":53774857208173,"sku":"wge1787257937252","price":28.12,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0920\/0526\/9869\/files\/allo-mini-boss-phat---pi-zero-master-dac-discontinued_1.jpg?v=1787257942"},{"product_id":"allo-piano-21-slave-dac-w-subwoofer-out-discontinued","title":"Allo Piano 2.1 \"Slave\" DAC w\/ Subwoofer Out [discontinued]","description":"\u003cp\u003ePiano can work as a 2.0 (all frequencies are passed to LR) as a 2.2 (xover frequency is chosen in GUI) and subwoofer has 2 outputs or as a 2.1 (same as 2.2 but subwoofer is mono).\u003c\/p\u003e\n\n\u003cp\u003eWe are using 2 DAC Ic's PCM5142 with integrated DSP. The PurePath software from TI is available for download (registration required) and can be used to create specific filters and other audio functions.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eThe board will come pre-programed as a 2.1 output (but you can create your own custom design and load it the board and can access the xover frequency directly from linux (we made a small app).\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eHardware wise, we have split the digital and analog side with LDOs and we feed the analog side using an extremely capable LDO LT3042 which is having ultra low noise and ultra high PSRR.. Basically each board has 4 LDO (2 for each DAC ic) (note that digital side uses cheaper LDOs).\u003c\/p\u003e\n\n\u003cp\u003eOf course, on the analog side we used only thin film resistors and poly caps in audiopath.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eFeatures \u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003ePiano 2.1 is a Slave DAC (Slave DACs are compatible with Sparky or Kali or Raspberry Pi)\u003c\/li\u003e\n\t\u003cli\u003eDedicated two No’s of 384 kHz\/32bit high-quality DAC PCM5142 for best sound quality\u003c\/li\u003e\n\t\u003cli\u003eAvailable with different output connectors: 4 x RCA\u003c\/li\u003e\n\t\u003cli\u003eDAC SNR is 112dB\u003c\/li\u003e\n\t\u003cli\u003eDAC THD+N @ - 1dBFS are –93dB\u003c\/li\u003e\n\t\u003cli\u003eFull Scale Output of DAC is 2.1Vrms\u003c\/li\u003e\n\t\u003cli\u003eDynamic Range of DAC is 112dB\u003c\/li\u003e\n\t\u003cli\u003eSampling Frequency ranges from 8 kHz to 384 kHz. (Sample rate is limited to 192kHz, for subwoofer modes - 2.1 \u0026amp; 2.2)\u003c\/li\u003e\n\t\u003cli\u003eUltra-low-noise voltage regulators for optimal audio performance\u003c\/li\u003e\n\t\u003cli\u003eIntegrated EEPROM for automatic configuration (with write-protection)\u003c\/li\u003e\n\t\u003cli\u003eCompatible with OSMC \/ Max2Play \/ RuneAudio \/ Volumio \/ Moode \/ PiCorePlayer \/ PiMusicBox \/ OpenELEC and others + Roon Ready\u003c\/li\u003e\n\t\u003cli\u003eOperating Temperature 0C to 70C\u003c\/li\u003e\n\t\u003cli\u003eBoard Size LWH = 68.7mm * 65mm * 22.2mm\u003c\/li\u003e\n\t\u003cli\u003eBoard Weight 30g\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003eDownloads\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eDownload Product Brochure\u003c\/li\u003e\n\t\u003cli\u003ePiano 2.1 Tech Manual\u003c\/li\u003e\n\t\u003cli\u003ePurepath Process Flow for Allo Piano 2.1\u003c\/li\u003e\n\t\u003cli\u003eTechnical Details for Piano 2.1 DAC\u003c\/li\u003e\n\t\u003cli\u003eVana Tech Manual\u003c\/li\u003e\n\t\u003cli\u003eDownload the DSP Firmware files for Piano 2.1 DAC\u003c\/li\u003e\n\t\u003cli\u003eConfiguring Allo Audio Cards for Raspberry Pi\u003c\/li\u003e\n\t\u003cli\u003eImages, Drivers \u0026amp; Resources\u003c\/li\u003e\n\u003c\/ul\u003e\n","brand":"Allo","offers":[{"title":"Default Title","offer_id":53774857339245,"sku":"rzj1787257940498","price":33.12,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0920\/0526\/9869\/files\/allo-piano-21-slave-dac-w-subwoofer-out-discontinued_1.jpg?v=1787257945"},{"product_id":"allo-rainbow-hat-8x8-led-matrix-discontinued","title":"Allo Rainbow HAT - 8x8 LED Matrix [Discontinued]","description":"\u003cp\u003eThe Rainbow HAT from Allo is a full RGB LED Matrix for the Raspberry Pi!\u003c\/p\u003e\n\n\u003cp\u003eThe Rainbow HAT features a matrix of 64 (8 x 8) RGB LEDs in HAT format, making it ideal for a range of projects, including games, status monitoring, mood lighting, art or anthing that involves lighting the universe in a spectrum of colour! \u003c\/p\u003e\n\n\u003cp\u003eThe Rainbow HAT is powered directly from the Raspberry Pi, and the LEDs are driven via DMA over PWM using a python library.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e:\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003e64 RGB LEDs (SK6812 RGB - 5mm x 5mm)\u003c\/li\u003e\n\t\u003cli\u003eLED data driven via DMA over PWM by using Python library\u003c\/li\u003e\n\t\u003cli\u003eCompatible with Raspberry Pi B+\/2\/3 \u0026amp; Zero\u003c\/li\u003e\n\t\u003cli\u003ePower rating 5V@ 50 - 540mA.\u003c\/li\u003e\n\t\u003cli\u003eBoard Dimensions: 65mm x 56.5mm x 12.3mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003eProduct Notes:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eLEDs are bright enough to cause eye pain and (for all I know) possibly retina damage when run at full strength. It's a good idea to set the brightness at 0.2 or so for direct viewing (whether you're looking directly at the pixels or not), or to put some diffuse material between you and the LEDs.\u003c\/li\u003e\n\t\u003cli\u003ePhoto-sensitivity warning: Patterns of light and darkness (stationary or moving), flashing lights, patterns and backgrounds on screens, and the like, may cause epilleptic seizures in some people. This is a danger EVEN IF THE PERSON (WHICH MAY BE *YOU*) HAS NEVER KNOWINGLY HAD A PHOTOSENSITIVE EPISODE BEFORE. It's up to you to learn the warning signs, but symptoms may include dizziness, nausea, vision changes, convlusions, disorientation, involuntary movements, and eye twitching. (This list is not necessarily exhaustive.)\u003c\/li\u003e\n\t\u003cli\u003eAs the HAT uses the PWM hardware and GPIO18, it will interfere with analogue audio playback. \u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003eDownloads\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eCode \u0026amp; Examples\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eRainbow HAT Manual\u003c\/strong\u003e\u003c\/p\u003e\n","brand":"Allo","offers":[{"title":"Default Title","offer_id":53774857404781,"sku":"jzx1787257941541","price":11.65,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0920\/0526\/9869\/files\/allo-rainbow-hat---8x8-led-matrix-discontinued_1.jpg?v=1787257945"},{"product_id":"allo-i2s-isolator-v12-discontinued","title":"Allo i2s Isolator v1.2 [Discontinued]","description":"\u003cp\u003eFull galvanic isolator, designed to isolate the KATANA and BOSS Master DACs from your Raspberry Pi! \u003c\/p\u003e\u003cp\u003e\u003cb\u003eThis is the Isolator v1.2!\u003c\/b\u003e\u003c\/p\u003e\n\n\u003cp\u003eIsolator HAT has been designed to isolate between an SBC and DAC, and it works on both master and slave DAC’s. By isolating your SBC board from the DAC board, using separate GND and Power supply lines, all possible noise and jitter coming from the source can be stopped and completely isolated prior to the DAC board!\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eFull galvanic isolator between SBC\/DAC\u003c\/li\u003e\n\t\u003cli\u003eCompatible with Katana \u0026amp; Boss DACs\u003c\/li\u003e\n\t\u003cli\u003eIsolated the I2C, I2S and GPIO’s\u003c\/li\u003e\n\t\u003cli\u003eWe recommend using LIFEPO4 batteries, and the Isolator will in turn provide 5v\/06A using LT3042 and 3.3V using LT3042 LDOs.\u003c\/li\u003e\n\t\u003cli\u003eSampling rate supported 44.1k to 192k 16\/24\/32\u003c\/li\u003e\n\t\u003cli\u003eLow noise LDO and filters used for reducing the noise and ripple\u003c\/li\u003e\n\u003c\/ul\u003e\n","brand":"Allo","offers":[{"title":"Default Title","offer_id":53774857437549,"sku":"obs1787257944089","price":29.04,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0920\/0526\/9869\/files\/allo-i2s-isolator-v12-discontinued_1.jpg?v=1787257948"},{"product_id":"christmas-tree-programmable-kit-discontinued","title":"Christmas Tree Programmable Kit [Discontinued]","description":"\u003cp\u003eThe perfect Raspberry Pi stocking filler this Christmas! The Christmas Tree programmable kit is the designed for any maker or hacker and an ideal kit for people new to Raspberry Pi or even the experienced users who want to practice the art of programming!\u003c\/p\u003e\n\u003cp\u003eThe Christmas Tree Programmable kit is a do-it-yourself programming kit! Each kit is \u003cstrong\u003efully assembled\u003c\/strong\u003e (\u003cu\u003eno soldering required\u003c\/u\u003e) but you'll need to code in your LED pattern to get your Pi shining for Christmas! We've got some example code to start you off which runs through a pattern on the 11 LEDs, but we can't wait to see what you come up with!\u003c\/p\u003e\n\u003cp\u003eIf the hardware hacker in you is itching for a scratch, we also stock a Solderable Christmas Tree kit with 555 timer (no programming)! Or if you really love your Geek, get both!\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eDIY Programming Kit for the Raspberry Pi B+\/2\/3\/Zero\/ZeroW\u003c\/li\u003e\n\u003cli\u003ePractice Programming Skills for Christmas\u003c\/li\u003e\n\u003cli\u003eNo Soldering Required! Just Plug \u0026amp; Code\u003c\/li\u003e\n\u003cli\u003eKit Includes:\n\u003cul\u003e\n\u003cli\u003eFull Assembled Christmas Tree PCB\u003c\/li\u003e\n\u003cli\u003e11 LEDs\u003c\/li\u003e\n\u003cli\u003eResistors\u003c\/li\u003e\n\u003cli\u003e40 Pin Header\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eDownloads\u003c\/h2\u003e\n\u003cp\u003eProgrammable Christmas Tree - Sample Code\u003c\/p\u003e","brand":"ModMyPi","offers":[{"title":"Default Title","offer_id":53774857503085,"sku":"ber1787257946571","price":4.62,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0920\/0526\/9869\/files\/christmas-tree-programmable-kit-discontinued_1.jpg?v=1787257951"},{"product_id":"christmas-tree-solder-kit-555-timer-discontinued","title":"Christmas Tree Solder Kit (555 Timer) [Discontinued]","description":"\u003cp\u003eThe perfect Raspberry Pi stocking filler this Christmas! The Christmas Tree solder kit is designed for any maker or hacker and is an ideal kit for people new to Raspberry Pi or even experienced users who want to practice the art of soldering!\u003c\/p\u003e\n\u003cp\u003eThe Christmas Tree Solder kit is a do-it-yourself solder kit that comes \u003cstrong\u003ecompletely unassembled\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003eJust follow our easy soldering guide on putting it all together, plug it into your Raspberry Pi and your Christmas Tree will light up the room! The kit includes 11 LEDs and uses a CD4017BE counter \u0026amp; 555 timer chip to light and rotate the LED's through a pre-defined pattern, no programming required!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePlease note: this is not a programmable kit, lights are controlled by a 555 timer\u003c\/strong\u003e. If you'd like to control the LEDs with your Raspberry Pi and Python, grab this one instead. You can also simply connect 5V and GND via jumper wires from any other 5V development board or power supply - no Pi required!\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eDIY Solder Kit for the Raspberry Pi B+\/2\/3\/Zero\/ZeroW\u003c\/li\u003e\n\u003cli\u003ePractice Soldering Skills for Christmas\u003c\/li\u003e\n\u003cli\u003eNo Programming Required! Plug \u0026amp; Play Once Assembled\u003c\/li\u003e\n\u003cli\u003eKit Includes:\n\u003cul\u003e\n\u003cli\u003e11 LEDs\u003c\/li\u003e\n\u003cli\u003eCD4017BE Counter IC\u003c\/li\u003e\n\u003cli\u003e555 Timer IC\u003c\/li\u003e\n\u003cli\u003eResistors\u003c\/li\u003e\n\u003cli\u003e40 Pin Header\u003c\/li\u003e\n\u003cli\u003eChristmas Tree PCB\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eTutorials\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eSoldering Guide\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ModMyPi","offers":[{"title":"Default Title","offer_id":53774857535853,"sku":"nxa1787257947341","price":3.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0920\/0526\/9869\/files\/christmas-tree-solder-kit-555-timer-discontinued_1.jpg?v=1787257951"},{"product_id":"screw-mount-breakout-card-for-raspberry-pi-for-26-18-awg-wires-discontinued","title":"Screw Mount Breakout Card for Raspberry Pi (for 26-18 AWG wires) [Discontinued]","description":"\u003cp\u003eThis card can be used directly on the Raspberry Pi or with the IO-Plus Home Automation Card.\u003c\/p\u003e\n\u003cp\u003eThe 2×20 pin header can be plugged into Raspberry Pi or into any stackable expansion card. It brings all 40 pins to screw-mount terminal blocks for conveniently wiring your project.\u003c\/p\u003e\n\u003cp\u003eMeasuring only 104mm x 52mm, the card adds a prototype area with 5 x 40 PCB holes spaced at 0.1″ apart where you can install your through-hole parts for your own custom project.\u003c\/p\u003e\n\u003cp\u003eThe terminal blocks accept 26 to 18 AWG wires and are rated 6A\/150V.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote\u003c\/strong\u003e: Raspberry Pi and IO-Plus not included. When installed on Raspberry Pi, pin 1 is opposite from the installation on the IO-Plus card.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eFor any technical questions about this product please email \u003c\/span\u003esupport@sequentmicrosystems.com\u003c\/p\u003e\n\u003ch3\u003e\u003cspan\u003eFeatures\u003c\/span\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eRoutes all 40 I\/O and power pins to screw terminal blocks\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003ePermits easy and secure field installation\u003c\/li\u003e\n\u003cli\u003eLarge prototype area for custom projects\u003c\/li\u003e\n\u003cli\u003e2.54mm Pitch PCB screw Terminal Block Connectors\u003c\/li\u003e\n\u003cli\u003eRated voltage: 300V\u003c\/li\u003e\n\u003cli\u003eRated current: 10A\u003c\/li\u003e\n\u003cli\u003eWithstanding voltage: AC 1500V\/1Min\u003c\/li\u003e\n\u003cli\u003eWire range: 24 - 12 AWG\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Sequent","offers":[{"title":"Default Title","offer_id":53774857601389,"sku":"pny1787257947299","price":5.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0920\/0526\/9869\/files\/screw-mount-breakout-card-for-raspberry-pi-for-26-18-awg-wires-discontinued_1.jpg?v=1787257952"},{"product_id":"grovepi-zero-board-discontinued","title":"GrovePi Zero Board [Discontinued]","description":"\u003cp\u003eGrovePi Zero connects your Raspberry Pi Zero to the Grove Sensor System! The Grove Pi Zero board allows you to easily connect a variety of sensors to the Raspberry Pi Zero. Simply connect a cable from the GrovePi Zero Board to your sensor, download our software examples, and your Zero enters the physical world. This is the newest version of the GrovePi Zero Board and is compatible with Raspberry Zero and Raspberry Pi Zero W. \u003cu\u003e\u003cstrong\u003eRaspberry Pi Zero NOT Included.\u003c\/strong\u003e\u003c\/u\u003e\u003c\/p\u003e\n\n\u003cp\u003eConnecting sensors to the Internet of Things (IOT) has never been this easy! No need for soldering or breadboards: plug in your Grove sensors and start programming directly.  GrovePi Zero is an easy-to-use and modular system for hardware hacking with the Raspberry Pi and the Internet of Things. Grove is an easy to use collection of more than 100 inexpensive plug-and-play modules that sense and control the physical world. By connecting Grove Sensors to the Raspberry Pi Zero, we empower you Pi to connect to the physical world.\u003c\/p\u003e\n\n\u003cp\u003eWith hundreds of sensors to choose from in the Grove collection, the possibilities for interaction are endless. GrovePi is about integrating Grove sensors and modules with the performance and ease of the Raspberry Pi.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eVisit our GrovePi Product Support \u0026amp; Documentation page for step-by-step tutorials, technical specs, detailed product pictures, and sample code libraries.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cu\u003e\u003cstrong\u003eThis is a purchase for the Grove Pi Zero Board only, no sensors, cables, Raspberry Pi Zero or other hardware are included.\u003c\/strong\u003e\u003c\/u\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf you're looking for a kit that has a full range of sensors checkout the \u003cstrong\u003eGrovePi Zero Base Kit\u003c\/strong\u003e!\u003c\/p\u003e\n","brand":"Seeed","offers":[{"title":"Default Title","offer_id":53774857699693,"sku":"lva1787257949311","price":16.21,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0920\/0526\/9869\/files\/grovepi-zero-board-discontinued_1.jpg?v=1787257953"},{"product_id":"diablo-dual-55a-motor-controller-discontinued","title":"Diablo - Dual 55A Motor Controller [discontinued]","description":"\u003cp\u003eDiablo is the most powerful PiBorg motor control board to date - \u003cb\u003e\u003cu\u003ethe ultimate in motor control!\u003c\/u\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003eIt controls two DC motors in forwards and reverse with pulse width modulation (PWM) which is useful for speed control and various stepper and solenoid control applications.\u003c\/p\u003e\n\u003cp\u003eIt has a regenerative function, so braking can charge your battery pack, in much the same way a modern F1 or Le Mans Hybrid race car does.\u003c\/p\u003e\n\u003cp\u003eAimed at commercial and industrial applications up to \u003cb\u003e\u003cu\u003e36V, current limiting to 55A\u003c\/u\u003e\u003c\/b\u003e, makes it powerful enough for even the most ambitious of projects.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eFeatures\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eControl REALLY BIG motors\u003c\/li\u003e\n\u003cli\u003eOn-board 5V regulator powers the Raspberry Pi\u003c\/li\u003e\n\u003cli\u003eRuns from any battery pack or power supply from 7V to 36V\u003c\/li\u003e\n\u003cli\u003eProper 55A output per motor connection\u003c\/li\u003e\n\u003cli\u003eSpeed control forwards and reverse via PWM\u003c\/li\u003e\n\u003cli\u003eMounts directly onto most Raspberry Pi models\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eStackable! Plug in more boards to control up to 200 motors!\u003c\/li\u003e\n\u003cli\u003eControls 2x DC Motors or 4, 5 or 6 wire stepper motors\u003c\/li\u003e\n\u003cli\u003eUses I2C SCK\/SDA and 3.3V\/GND pins for communications allowing interfacing to the Raspberry Pi, Arduino, Beagle Bone, Microchip pic and many others.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eOverheat protection, under-voltage lockout, and short circuit protection.\u003c\/li\u003e\n\u003cli\u003eDiablo code library and examples available on GitHub.\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb\u003ePackage Includes: \u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePiBorg Diablo Board\u003c\/li\u003e\n\u003cli\u003eEPO Jumper\u003c\/li\u003e\n\u003cli\u003eMounting Hardware\u003c\/li\u003e\n\u003cli\u003eI\u003csup style=\"font-size: 9px;\"\u003e2\u003c\/sup\u003eC Connection Cables.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eClick here for getting started guides, code examples and more.\u003c\/strong\u003e\u003c\/p\u003e","brand":"PiBorg","offers":[{"title":"Default Title","offer_id":53774857732461,"sku":"lzl1787257949683","price":44.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0920\/0526\/9869\/files\/diablo---dual-55a-motor-controller-discontinued_1.jpg?v=1787257954"},{"product_id":"fish-dish-gpio-led-buzzer-board-discontinued","title":"Fish Dish - GPIO LED Buzzer Board [Discontinued]","description":"\u003cp\u003eFish Dish from Pi Supply is a funky and fun LED and buzzer GPIO breakout board for the Raspberry Pi! The breakout board (which is shaped like a fish!!) includes a switch, 3 LEDs (red, yellow \u0026amp; green) and a buzzer, and is designed to make it super simple and fun to interface between physical electronics and the Raspberry Pi. It's perfect for kids (and big kids) to showcase a variety of interfacing techniques on the Raspberry Pi.\u003c\/p\u003e\n\n\u003cdiv\u003eIt also comes with a stacking header (as pictured) meaning that you can still use the other GPIO pins if you wish.\u003c\/div\u003e\n\n\u003cp\u003e\u003cstrong\u003ePlease note, this kit does require simple soldering to assemble.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eThe Fish Dish Features:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eAwesome Fish Shaped Design!\u003c\/li\u003e\n\t\u003cli\u003e3 x LED's (Red, Yellow \u0026amp; Green)\u003c\/li\u003e\n\t\u003cli\u003e5V Buzzer\u003c\/li\u003e\n\t\u003cli\u003eSwitch and Resistors\u003c\/li\u003e\n\t\u003cli\u003eAll thru-hole components - you can solder it yourself.\u003c\/li\u003e\n\t\u003cli\u003eOpen source hardware.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cb\u003eTutorials:\u003c\/b\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cb\u003eSample Code\u003c\/b\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eKickStarter\u003c\/strong\u003e\u003c\/p\u003e","brand":"ModMyPi","offers":[{"title":"Default Title","offer_id":53774857797997,"sku":"yxk1787257952727","price":2.52,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0920\/0526\/9869\/files\/fish-dish---gpio-led-buzzer-board-discontinued_1.jpg?v=1787257957"}],"url":"https:\/\/www.ruralgoods.shop\/collections\/gpio.oembed","provider":"My Store","version":"1.0","type":"link"}